Bu konu çözüldü olarak işaretlenmiştir. Çözülmediğini düşünüyorsanız konuyu rapor edebilirsiniz.

Kursad

Becerikli
Katılım
26 Eylül 2025
Mesajlar
30
Çözümler
1
Beğeniler
13
Ben EndeavourOS kullanıyorum kullandığım işletim sisteminde Bluetooth için bluez adlı sürücüler kullanılıyor ben bu sürücülerin son 2 versiyonunda maalesef sıkıntı yaşamaktayım. Bluez sürücüsünün 5.83.1 ve 5.84.1 sürümlerinde bilgisayarım Bluetooth kulaklıktan kopma sorunnları yaşıyor sebebini bilmiyorum downgrade kommutu ile sürümü 5.82.1'e aldığımda sorun çıkmıyor. Benim yaşadığım sorun bu sürüm güncelleniyor açık varsa kapaıtılıyor ya da iyileştirmeler yapılıyor ancak ben bunlara son iki sürümdür erişemiyorum.
Dolayısıyla yardımınızı istemekteyim.

Yaşadığım soruna örnek vermek gerkirse Bluetooth kulaklığıma bağlandıktan itibaren 5 saniye içerisinde bağlantı kopuyor ve yeniden bağlandıktan sonra da bu durum devam ediyor.
 
Çözüm
sudo modprobe -r btqca hci_uart
sudo modprobe btqca
sudo modprobe hci_uart

sudo systemctl restart bluetooth

Bu kodları yazınız sonrasında aşağıdaki kodları yazınız ve çıktıları veriniz.

dmesg | grep -i bluetooth
hciconfig -a
sudo dmesg | grep -i bluetooth
[ 39.100827] Bluetooth: Core ver 2.22
[ 39.100856] NET: Registered PF_BLUETOOTH protocol family
[ 39.100858] Bluetooth: HCI device and connection manager initialized
[ 39.100863] Bluetooth: HCI socket layer initialized
[ 39.100866] Bluetooth: L2CAP socket layer initialized
[ 39.100872] Bluetooth: SCO socket layer initialized
[ 39.747009] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 40.693441] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 40.693448] Bluetooth: BNEP filters: protocol multicast
[ 40.693453] Bluetooth: BNEP socket layer initialized
[ 40.699098] Bluetooth: MGMT ver 1.23
[ 54.206658] Bluetooth: RFCOMM TTY layer initialized
[ 54.206799] Bluetooth: RFCOMM socket layer initialized
[ 54.206805] Bluetooth: RFCOMM ver 1.11
[ 98.144666] Bluetooth: HCI UART driver ver 2.3
[ 98.144696] Bluetooth: HCI UART protocol H4 registered
[ 98.144699] Bluetooth: HCI UART protocol BCSP registered
[ 98.144741] Bluetooth: HCI UART protocol LL registered
[ 98.144745] Bluetooth: HCI UART protocol ATH3K registered
[ 98.144763] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 98.144809] Bluetooth: HCI UART protocol Intel registered
[ 98.144897] Bluetooth: HCI UART protocol Broadcom registered
[ 98.144912] Bluetooth: HCI UART protocol QCA registered
[ 98.144914] Bluetooth: HCI UART protocol AG6XX registered
[ 98.144929] Bluetooth: HCI UART protocol Marvell registered
[ 98.144948] Bluetooth: HCI UART protocol AML registered

hciconfig -a
bash: hciconfig: command not found

Güncelleyin siz son sürümde olsun.
Senin verdiğin bu komutlardan sonra bağlandığımda sorun çıkmadı, komutlar şu:

sudo modprobe -r btqca hci_uart
sudo modprobe btqca
sudo modprobe hci_uart

Ama bunu bilgisayarı her açtığımda yazarsam işe yarıyor.
sudo pacman -Syy
sudo pacman -Syyu
Bunları yazın ve çıktısını atınız.
sudo pacman -Syy
sudo pacman -Syyu
:: Paket veritabanları senkronize ediliyor...
endeavouros 15,9 KiB 29,2 KiB/s 00:01 [-----------------------------------------------------------] 100%
core 120,5 KiB 191 KiB/s 00:01 [-----------------------------------------------------------] 100%
extra 8,0 MiB 945 KiB/s 00:09 [-----------------------------------------------------------] 100%
multilib 132,3 KiB 212 KiB/s 00:01 [-----------------------------------------------------------] 100%
:: Paket veritabanları senkronize ediliyor...
endeavouros 15,9 KiB 40,5 KiB/s 00:00 [-----------------------------------------------------------] 100%
core 120,5 KiB 230 KiB/s 00:01 [-----------------------------------------------------------] 100%
extra 8,0 MiB 1793 KiB/s 00:05 [-----------------------------------------------------------] 100%
multilib 132,3 KiB 245 KiB/s 00:01 [-----------------------------------------------------------] 100%
:: Sistem güncellemesi başlatılıyor...
paket bağımlılıkları çözümleniyor...
varsa paketler arası çakışmalara bakılıyor...

Paket (1) Eski Sürüm Yeni Sürüm Değişiklik İndirme Boyutu

extra/glycin 2.0.0-4 2.0.0-5 0,07 MiB 3,84 MiB

Toplam İndirme Boyutu: 3,84 MiB
Toplam Kurulum Boyutu: 19,45 MiB
Güncelleme Boyutu: 0,07 MiB

:: Kuruluma onay veriyor musunuz? [E/h]
 
sudo pacman -Syy
sudo pacman -Syyu
:: Paket veritabanları senkronize ediliyor...
endeavouros 15,9 KiB 29,2 KiB/s 00:01 [-----------------------------------------------------------] 100%
core 120,5 KiB 191 KiB/s 00:01 [-----------------------------------------------------------] 100%
extra 8,0 MiB 945 KiB/s 00:09 [-----------------------------------------------------------] 100%
multilib 132,3 KiB 212 KiB/s 00:01 [-----------------------------------------------------------] 100%
:: Paket veritabanları senkronize ediliyor...
endeavouros 15,9 KiB 40,5 KiB/s 00:00 [-----------------------------------------------------------] 100%
core 120,5 KiB 230 KiB/s 00:01 [-----------------------------------------------------------] 100%
extra 8,0 MiB 1793 KiB/s 00:05 [-----------------------------------------------------------] 100%
multilib 132,3 KiB 245 KiB/s 00:01 [-----------------------------------------------------------] 100%
:: Sistem güncellemesi başlatılıyor...
paket bağımlılıkları çözümleniyor...
varsa paketler arası çakışmalara bakılıyor...

Paket (1) Eski Sürüm Yeni Sürüm Değişiklik İndirme Boyutu

extra/glycin 2.0.0-4 2.0.0-5 0,07 MiB 3,84 MiB

Toplam İndirme Boyutu: 3,84 MiB
Toplam Kurulum Boyutu: 19,45 MiB
Güncelleme Boyutu: 0,07 MiB

:: Kuruluma onay veriyor musunuz? [E/h]
Şuanda yeniden başlatınız ve sorunun olduğunu varsayıyorum aşağıdaki kodları yazdıktan sonra devam edecek mi bakınız yeniden başlatmadan deneyin.

sudo modprobe -r btusb
sudo modprobe btusb
 
sudo dmesg | grep -i bluetooth
Çıktısı nedir?
sudo dmesg | grep -i bluetooth
[sudo] password for kursad:
[ 17.323796] Bluetooth: Core ver 2.22
[ 17.323830] NET: Registered PF_BLUETOOTH protocol family
[ 17.323833] Bluetooth: HCI device and connection manager initialized
[ 17.323839] Bluetooth: HCI socket layer initialized
[ 17.323843] Bluetooth: L2CAP socket layer initialized
[ 17.323849] Bluetooth: SCO socket layer initialized
[ 17.933256] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 18.960821] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.960826] Bluetooth: BNEP filters: protocol multicast
[ 18.960832] Bluetooth: BNEP socket layer initialized
[ 18.969964] Bluetooth: MGMT ver 1.23
[ 31.748020] Bluetooth: RFCOMM TTY layer initialized
[ 31.748030] Bluetooth: RFCOMM socket layer initialized
[ 31.748036] Bluetooth: RFCOMM ver 1.11
 
sudo dmesg | grep -i bluetooth
[sudo] password for kursad:
[ 17.323796] Bluetooth: Core ver 2.22
[ 17.323830] NET: Registered PF_BLUETOOTH protocol family
[ 17.323833] Bluetooth: HCI device and connection manager initialized
[ 17.323839] Bluetooth: HCI socket layer initialized
[ 17.323843] Bluetooth: L2CAP socket layer initialized
[ 17.323849] Bluetooth: SCO socket layer initialized
[ 17.933256] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 18.960821] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.960826] Bluetooth: BNEP filters: protocol multicast
[ 18.960832] Bluetooth: BNEP socket layer initialized
[ 18.969964] Bluetooth: MGMT ver 1.23
[ 31.748020] Bluetooth: RFCOMM TTY layer initialized
[ 31.748030] Bluetooth: RFCOMM socket layer initialized
[ 31.748036] Bluetooth: RFCOMM ver 1.11
sudo modprobe -r btusb
sudo modprobe hci_uart
sudo modprobe btqca

sudo dracut --force

Ve şu kodun çıktısı:
dmesg | grep -i bluetooth
 
sudo modprobe -r btusb
sudo modprobe hci_uart
sudo modprobe btqca

sudo dracut --force

Ve şu kodun çıktısı:
dmesg | grep -i bluetooth
sudo dmesg | grep -i bluetooth
[ 17.323796] Bluetooth: Core ver 2.22
[ 17.323830] NET: Registered PF_BLUETOOTH protocol family
[ 17.323833] Bluetooth: HCI device and connection manager initialized
[ 17.323839] Bluetooth: HCI socket layer initialized
[ 17.323843] Bluetooth: L2CAP socket layer initialized
[ 17.323849] Bluetooth: SCO socket layer initialized
[ 17.933256] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 18.960821] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.960826] Bluetooth: BNEP filters: protocol multicast
[ 18.960832] Bluetooth: BNEP socket layer initialized
[ 18.969964] Bluetooth: MGMT ver 1.23
[ 31.748020] Bluetooth: RFCOMM TTY layer initialized
[ 31.748030] Bluetooth: RFCOMM socket layer initialized
[ 31.748036] Bluetooth: RFCOMM ver 1.11
[ 426.039489] Bluetooth: hci0: urb 00000000c2321878 failed to resubmit (2)
[ 426.210371] Bluetooth: HCI UART driver ver 2.3
[ 426.210376] Bluetooth: HCI UART protocol H4 registered
[ 426.210378] Bluetooth: HCI UART protocol BCSP registered
[ 426.210405] Bluetooth: HCI UART protocol LL registered
[ 426.210408] Bluetooth: HCI UART protocol ATH3K registered
[ 426.210422] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 426.210462] Bluetooth: HCI UART protocol Intel registered
[ 426.210551] Bluetooth: HCI UART protocol Broadcom registered
[ 426.210571] Bluetooth: HCI UART protocol QCA registered
[ 426.210574] Bluetooth: HCI UART protocol AG6XX registered
[ 426.210587] Bluetooth: HCI UART protocol Marvell registered
[ 426.210601] Bluetooth: HCI UART protocol AML registered