kompetankedi

kompetankedi

Üstün
Ağ Büyücüsü
Katılım
8 Eylül 2024
Mesajlar
1.834
Makaleler
1
Çözümler
26
Beğeniler
1.236
Yer
Bootloader
Merhaba, evdeki self-host sunucum için şu an Zorin OS 17 Core var ve gereksiz yoruyor. Bir sudo apt Update için 10 dk bekliyorum, önerdiğiniz hafif bir dağıtım var mı? Masaüstü ortamına gerek yok.

Sistem özellikleri;

  • 300W PSU.
  • 1TB WD Blue HDD.
  • GT420 2 GB.
  • 8 GB DDR4 2666MHz.
  • R3 1200.

Kod: 
sudo smartctl -a /dev/sda
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-6.8.0-107-generic] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Blue
Device Model:     WDC WD10EZEX-22BBHA0
Serial Number:    WD-WCC6Y2HDLPN6
LU WWN Device Id: 5 0014ee 2bff943ba
Firmware Version: 01.01A01
User Capacity:    1.000.204.886.016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Apr  8 10:26:46 2026 +03
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84) Offline data collection activity
                                        was suspended by an interrupting command from host.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (10740) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 112) minutes.
SCT capabilities:              (0x3035) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   181   175   021    Pre-fail  Always       -       1950
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       242
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   089   089   000    Old_age   Always       -       8621
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       212
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       155
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       174
194 Temperature_Celsius     0x0022   111   095   000    Old_age   Always       -       32
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       6
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 1651 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1651 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 46 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 03 46 00 00 00 a0 00      00:00:21.407  SET FEATURES [Set transfer mode]
  ef 03 46 00 00 00 a0 00      00:00:21.396  SET FEATURES [Set transfer mode]
  e1 00 00 00 00 00 a0 00      00:00:21.387  IDLE IMMEDIATE

Error 1650 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 46 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 03 46 00 00 00 a0 00      00:00:21.396  SET FEATURES [Set transfer mode]
  e1 00 00 00 00 00 a0 00      00:00:21.387  IDLE IMMEDIATE
  e7 00 00 00 00 00 a0 00      00:00:20.476  FLUSH CACHE
  e5 00 00 00 00 00 a0 00      00:00:20.476  CHECK POWER MODE

Error 1649 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 00 00 00 00 a0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  e1 00 00 00 00 00 a0 00      00:00:21.387  IDLE IMMEDIATE
  e7 00 00 00 00 00 a0 00      00:00:20.476  FLUSH CACHE
  e5 00 00 00 00 00 a0 00      00:00:20.476  CHECK POWER MODE
  ef 03 46 00 00 00 a0 00      00:00:13.538  SET FEATURES [Set transfer mode]

Error 1648 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 00 00 00 00 a0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  e7 00 00 00 00 00 a0 00      00:00:20.476  FLUSH CACHE
  e5 00 00 00 00 00 a0 00      00:00:20.476  CHECK POWER MODE
  ef 03 46 00 00 00 a0 00      00:00:13.538  SET FEATURES [Set transfer mode]
  ef 03 46 00 00 00 a0 00      00:00:13.528  SET FEATURES [Set transfer mode]

Error 1647 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 46 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 03 46 00 00 00 a0 00      00:00:13.538  SET FEATURES [Set transfer mode]
  ef 03 46 00 00 00 a0 00      00:00:13.528  SET FEATURES [Set transfer mode]
  ef 03 46 00 00 00 a0 00      00:00:13.518  SET FEATURES [Set transfer mode]

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
 
Son düzenleyen: Moderatör:
001 dedi:
antiX gibi ucuk dagitim kullanmak gerekmiyor bile bence o sistem ile. Ubuntu server da kullanabilirsiniz, ben genellikle rhel tabanli dagitimlar kullandigim icin kendi aliskanligimdan soyledim.
Genişletmek için tıkla...
Küçültmek için tıkla...

Rhel tabanı hiç kullanmadım antiX26 Core şu an sanal makinede test ediyorum gayet güzel masaüstü ortamı da yok.
 
Son düzenleme:

Benzer konular

Erencikefe
Günlük kullanım için en iyi ve hafif Linux dağıtımı önerisi
2
Mesaj
18
Görüntüleme
381
Erencikefe
Erencikefe
K
i3-6006U sistem için basit Linux dağıtımı önerisi
Mesaj
6
Görüntüleme
119
Reend
Reend
THE KEROXEA
Tecrübelenmek için hangi Linux dağıtımını önerirsiniz?
2 3
Mesaj
20
Görüntüleme
307
THE KEROXEA
THE KEROXEA
Tuhoiisa
Acer Aspire Switch 10E için Linux dağıtımı önerisi
Mesaj
0
Görüntüleme
35
Tuhoiisa
Tuhoiisa

Yeni konular

Yeni mesajlar