Çözüldü PUBG oyuna girince mavi ekran

Bu konu çözüldü olarak işaretlenmiştir. Çözülmediğini düşünüyorsanız konuyu rapor edebilirsiniz.

MKARADAYI

Çalışkan
Katılım
6 Ağustos 2025
Mesajlar
2
Beğeniler
1
  • Anakart: ASRock B450M HDV r4.0
  • İşlemci: Ryzen 5 3600X
  • Ekran Kartı: GTX 1650 Super
  • İşletim Sistemi: Windows 10 Pro 22H2

Merhaba,

PUBG'de oyuna giriş yaptığımda, ilk ya da ikinci oyuna girerken oyun aniden çöküp masaüstüne dönüyor. Yabancı forumlarda BIOS üzerinden sanallaştırmayı kapatarak bu sorunu çözenlerin olduğunu okuyunca ben de denedim; fakat daha kötü oldu. Bu sefer oyuna girerken, lobideyken ya da oyun sırasında sürekli mavi ekran hatası almaya başladım. Eğer mavi ekran hatası almazsam, maksimum 5 dakika kadar oynayabiliyorum; ardından oyun yine çöküyor.

Neredeyse denemediğim bir şey kalmadı. Aşağıda denediklerimi sırasıyla yazıyorum:

  • Steam üzerinden oyun dosyalarının bütünlüğünü doğruladım.
  • Oyunu tüm dosyalarıyla birlikte kaldırıp sıfırdan yükledim.
  • DDU kullanarak grafik sürücüsünü kaldırıp yeniden yükledim.
  • Windows'u sıfırdan kurdum.
  • BIOS'tan sanallaştırmayı devre dışı bırakarak denedim.
  • Windows Güvenlik Duvarı'nı kapatarak denedim.
  • .NET Framework'ü güncelledim.
  • DirectX 11, 11 Beta ve 12 ile denemeler yaptım (oyun içinden).

Bilgisayarı ilk topladığımda günlerce, hatta haftalarca hiç kapanmadan oyun oynayabiliyordum. Şu anda ise PUBG bile oynayamıyorum. Bu arada, Forza Horizon 5 gibi başka oyunlarda herhangi bir sorun yaşamıyorum.

Yardımcı olabilecek varsa, minidump dosyasını da paylaşıyorum. Minidump
 
Çözüm
  • Anakart: ASRock B450M-HDV R4.0
  • RAM: 2x8 GB Kingston HyperX DDR4 3000MHz (XMP ile 3266 MHz çalışıyor)
  • İşlemci: Ryzen 5 3600X
  • BIOS: P10.31 Beta.
Çözüm önerilerim:

  • 10.42 Beta'ya geçin.
  • Bir de RAM'leriniz KHX3000C15D4/8GX modelinde, ancak 3266 MHz hızında çalışıyor. Bu model XMP ile 3000 MHz için tasarlandı, sizinki XMP ile 3266'ya çekilmiş gibi. XMP kapatıp deneyin.
  • Bellek testi yapın.
Kod:
KERNEL_AUTO_BOOST_LOCK_ACQUISITION_WITH_RAISED_IRQL (192)
A lock tracked by AutoBoost was acquired while executing at DISPATCH_LEVEL or
above.
Arguments:
Arg1: ffffd208ebe3e080, The address of the thread.
Arg2: ffffd208e0bfc9e0, The lock address.
Arg3: 0000000000000000, The IRQL at which the lock was acquired.
Arg4: 0000000000000000, Reserved.

Debugging Details:
------------------


KEY_VALUES_STRING: 1

    Key  : Analysis.CPU.mSec
    Value: 906

    Key  : Analysis.Elapsed.mSec
    Value: 3071

    Key  : Analysis.IO.Other.Mb
    Value: 0

    Key  : Analysis.IO.Read.Mb
    Value: 1

    Key  : Analysis.IO.Write.Mb
    Value: 0

    Key  : Analysis.Init.CPU.mSec
    Value: 343

    Key  : Analysis.Init.Elapsed.mSec
    Value: 1022

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 84

    Key  : Analysis.Version.DbgEng
    Value: 10.0.27871.1001

    Key  : Analysis.Version.Description
    Value: 10.2505.01.02 amd64fre

    Key  : Analysis.Version.Ext
    Value: 1.2505.1.2

    Key  : Bugcheck.Code.LegacyAPI
    Value: 0x192

    Key  : Bugcheck.Code.TargetModel
    Value: 0x192

    Key  : Failure.Bucket
    Value: 0x192_nt!ExAcquireCacheAwarePushLockSharedEx

    Key  : Failure.Hash
    Value: {0b3e94d6-ae37-4afe-1a69-72779fd6e91e}

    Key  : WER.OS.Branch
    Value: vb_release

    Key  : WER.OS.Version
    Value: 10.0.19041.1


BUGCHECK_CODE:  192

BUGCHECK_P1: ffffd208ebe3e080

BUGCHECK_P2: ffffd208e0bfc9e0

BUGCHECK_P3: 0

BUGCHECK_P4: 0

FILE_IN_CAB:  080625-7359-01.dmp

FAULTING_THREAD:  ffffd208ebe3e080

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  WerFault.exe

STACK_TEXT:  
ffff8e80`65337fb8 fffff802`3d0cac6f     : 00000000`00000192 ffffd208`ebe3e080 ffffd208`e0bfc9e0 00000000`00000000 : nt!KeBugCheckEx
ffff8e80`65337fc0 fffff802`3914660d     : ffffd208`f2e96a20 00000000`00000001 00000000`00000000 00000000`00000000 : nt!ExAcquireCacheAwarePushLockSharedEx+0x14f
ffff8e80`65338000 fffff802`39145f7a     : ffff8e80`65338200 ffff8e80`65338102 ffffd208`ed958a00 00000000`00000000 : FLTMGR!FltpPerformPreCallbacksWorker+0x4ad
ffff8e80`65338120 fffff802`39145021     : ffff8e80`65339000 ffff8e80`65333000 ffffd208`e4b49010 ffff8e80`65338230 : FLTMGR!FltpPassThroughInternal+0xca
ffff8e80`65338170 fffff802`39144a2b     : ffffffff`fffe7960 00000000`00000000 ffffd208`e4b49010 ffff8e80`653388a0 : FLTMGR!FltpPassThrough+0x541
ffff8e80`65338200 fffff802`3d0d2205     : ffffd208`ed958a00 fffff802`3d0d52d8 ffffd208`e463a3b0 00000000`00000000 : FLTMGR!FltpDispatch+0x8b
ffff8e80`65338260 fffff802`3d450d1f     : ffffd208`ed958a00 ffffd208`e463a3b0 ffffd208`e4507d60 ffffd208`e4507d60 : nt!IofCallDriver+0x55
ffff8e80`653382a0 fffff802`3d43d9a0     : ffffd208`df4c5140 00000000`00000000 ffffd208`ed9589d0 ffffd208`e4b49010 : nt!IopDeleteFile+0x14f
ffff8e80`65338320 fffff802`3d0cb957     : 00000000`00000000 00000000`00000000 ffff8e80`65338650 ffffd208`ed958a00 : nt!ObpRemoveObjectRoutine+0x80
ffff8e80`65338380 fffff802`3d0cb87e     : fffff802`39177200 00000000`00000001 ffff8e80`653388a0 00000000`00000001 : nt!ObfDereferenceObjectWithTag+0xc7
ffff8e80`653383c0 fffff802`3d450287     : ffffd208`ed958a00 00000000`00000000 00000000`eeda2a45 fffff802`39177200 : nt!HalPutDmaAdapter+0xe
ffff8e80`653383f0 fffff802`3d442517     : ffffd208`e45858f0 fffff802`39177200 ffffd208`eeda2a20 ffffbd0a`679f0601 : nt!IopParseDevice+0x1e27
ffff8e80`65338550 fffff802`3d4ce9aa     : ffffd208`eeda2a01 ffff8e80`653387b8 00000000`00000040 ffffd208`df4c5140 : nt!ObpLookupObjectName+0x1117
ffff8e80`65338720 fffff802`3d40ca75     : ffff8e80`00000000 000000fb`71ef7960 000000fb`71ef7f01 000000fb`71ef7930 : nt!ObOpenObjectByNameEx+0x1fa
ffff8e80`65338850 fffff802`3d211308     : 000000fb`71ef8100 ffff8e80`65338b80 ffffd208`ebe3e080 000002d2`22c32280 : nt!NtQueryAttributesFile+0x1c5
ffff8e80`65338b00 00007ffe`fc5adc94     : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x28
000000fb`71ef78b8 00000000`00000000     : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x00007ffe`fc5adc94


SYMBOL_NAME:  nt!ExAcquireCacheAwarePushLockSharedEx+14f

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

IMAGE_VERSION:  10.0.19041.6093

STACK_COMMAND: .process /r /p 0xffffd208ef8b7340; .thread 0xffffd208ebe3e080 ; kb

BUCKET_ID_FUNC_OFFSET:  14f

FAILURE_BUCKET_ID:  0x192_nt!ExAcquireCacheAwarePushLockSharedEx

OS_VERSION:  10.0.19041.1

BUILDLAB_STR:  vb_release

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {0b3e94d6-ae37-4afe-1a69-72779fd6e91e}

KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common BugCheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff8041a21e7c8, The address that the exception occurred at
Arg3: 0000000000000000, Parameter 0 of the exception
Arg4: ffffffffffffffff, Parameter 1 of the exception

Debugging Details:
------------------

*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ExceptionRecord                               ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ContextRecord                                 ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ExceptionRecord                               ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ContextRecord                                 ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ExceptionRecord                               ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ContextRecord                                 ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ExceptionRecord                               ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ContextRecord                                 ***
***                                                                   ***
*************************************************************************

KEY_VALUES_STRING: 1

    Key  : Analysis.CPU.mSec
    Value: 1390

    Key  : Analysis.Elapsed.mSec
    Value: 1420

    Key  : Analysis.IO.Other.Mb
    Value: 0

    Key  : Analysis.IO.Read.Mb
    Value: 1

    Key  : Analysis.IO.Write.Mb
    Value: 18

    Key  : Analysis.Init.CPU.mSec
    Value: 453

    Key  : Analysis.Init.Elapsed.mSec
    Value: 9513

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 76

    Key  : Analysis.Version.DbgEng
    Value: 10.0.27871.1001

    Key  : Analysis.Version.Description
    Value: 10.2505.01.02 amd64fre

    Key  : Analysis.Version.Ext
    Value: 1.2505.1.2

    Key  : Bugcheck.Code.LegacyAPI
    Value: 0x1e

    Key  : Bugcheck.Code.TargetModel
    Value: 0x1e

    Key  : Failure.Bucket
    Value: AV_R_nt!RtlpUnwindPrologue

    Key  : Failure.Exception.IP.Address
    Value: 0xfffff8041a21e7c8

    Key  : Failure.Exception.IP.Module
    Value: nt

    Key  : Failure.Exception.IP.Offset
    Value: 0x21e7c8

    Key  : Failure.Hash
    Value: {225f562a-9f02-8c97-d664-bd68a50e4c7f}

    Key  : Stack.Pointer
    Value: PRCBException

    Key  : WER.OS.Branch
    Value: vb_release

    Key  : WER.OS.Version
    Value: 10.0.19041.1


BUGCHECK_CODE:  1e

BUGCHECK_P1: ffffffffc0000005

BUGCHECK_P2: fffff8041a21e7c8

BUGCHECK_P3: 0

BUGCHECK_P4: ffffffffffffffff

FILE_IN_CAB:  080625-6031-01.dmp

FAULTING_THREAD:  ffff9d07dbf7e080

EXCEPTION_PARAMETER1:  0000000000000000

EXCEPTION_PARAMETER2:  ffffffffffffffff

READ_ADDRESS: fffff8041acfb390: Unable to get MiVisibleState
Unable to get NonPagedPoolStart
Unable to get NonPagedPoolEnd
Unable to get PagedPoolStart
Unable to get PagedPoolEnd
unable to get nt!MmSpecialPagesInUse
 ffffffffffffffff 

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXPNP: 1 (!blackboxpnp)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  TslGame.exe

STACK_TEXT:  
ffffb800`63fc4ea8 fffff804`1a474ff2     : 00000000`0000001e ffffffff`c0000005 fffff804`1a21e7c8 00000000`00000000 : nt!KeBugCheckEx
ffffb800`63fc4eb0 fffff804`1a407db2     : fffff804`1a31d55c 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiExceptionStackSwitchHandler+0x157a96
ffffb800`63fc4ef0 fffff804`1a33e817     : ffffb800`63fc5460 00000000`00000000 ffffb800`63fc6fb0 fffff804`1a3fe3d2 : nt!RtlpExecuteHandlerForException+0x12
ffffb800`63fc4f20 fffff804`1a33c4b6     : ffffb800`63fc5e38 ffffb800`63fc5b70 ffffb800`63fc5e38 fffff804`1a0b0b60 : nt!RtlDispatchException+0x297
ffffb800`63fc5640 fffff804`1a411bec     : 00000073`006c006e 00000070`00000030 00060000`00000000 00010018`00000056 : nt!KiDispatchException+0x186
ffffb800`63fc5d00 fffff804`1a40cfef     : 00000000`00000000 ffffb800`63fc5f78 00000001`00000010 0000ffff`f8041a3c : nt!KiExceptionDispatch+0x12c
ffffb800`63fc5ee0 fffff804`1a21e7c8     : 00000000`00000000 fffff804`1a32b5f1 00000000`0000011c 00000000`00000000 : nt!KiGeneralProtectionFault+0x32f
ffffb800`63fc6070 fffff804`1a21e234     : fffff804`1a000000 fffff804`00000000 df745c7a`edea3418 00007fff`fffeffff : nt!RtlpUnwindPrologue+0x248
ffffb800`63fc60d0 fffff804`1a33ea2f     : fffff804`1a0e4f40 ffffb800`00000000 ffffb800`63fc6760 fffff804`1a0e4f40 : nt!RtlpxVirtualUnwind+0x104
ffffb800`63fc6150 fffff804`1a33e74e     : ffffb800`63fc6710 00000000`00000000 ffffc908`f4292a90 fffff804`1a411208 : nt!RtlVirtualUnwind+0x5f
ffffb800`63fc61d0 fffff804`1a33c4b6     : ffffc908`f4292588 ffffb800`63fc6e20 ffffc908`f4292588 00000297`efd90000 : nt!RtlDispatchException+0x1ce
ffffb800`63fc68f0 00000000`00000000     : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiDispatchException+0x186


SYMBOL_NAME:  nt!RtlpUnwindPrologue+248

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

IMAGE_VERSION:  10.0.19041.6157

STACK_COMMAND: .process /r /p 0xffff9d07dc99c080; .thread 0xffff9d07dbf7e080 ; kb

BUCKET_ID_FUNC_OFFSET:  248

FAILURE_BUCKET_ID:  AV_R_nt!RtlpUnwindPrologue

OS_VERSION:  10.0.19041.1

BUILDLAB_STR:  vb_release

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {225f562a-9f02-8c97-d664-bd68a50e4c7f}

Followup:     MachineOwner
---------

    PnpActivityId      : {00000000-0000-0000-0000-000000000000}
    PnpActivityTime    : 133989816157148193
    PnpEventInformation: 2
    PnpEventInProgress : 0
    PnpProblemCode     : 24
    PnpVetoType        : 0
    DeviceId           : STORAGE\Volume\{35cbbb88-7222-11f0-b11a-806e6f6e6963}#0000000000100000
    VetoString         : 

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced.  This cannot be protected by try-except.
Typically the address is just plain bad or it is pointing at freed memory.
Arguments:
Arg1: ffff928d00000001, memory referenced.
Arg2: 0000000000000010, X64: bit 0 set if the fault was due to a not-present PTE.
    bit 1 is set if the fault was due to a write, clear if a read.
    bit 3 is set if the processor decided the fault was due to a corrupted PTE.
    bit 4 is set if the fault was due to attempted execute of a no-execute PTE.
    - ARM64: bit 1 is set if the fault was due to a write, clear if a read.
    bit 3 is set if the fault was due to attempted execute of a no-execute PTE.
Arg3: ffff928d00000001, If non-zero, the instruction address which referenced the bad memory
    address.
Arg4: 0000000000000002, (reserved)

Debugging Details:
------------------


KEY_VALUES_STRING: 1

    Key  : AV.Type
    Value: Execute

    Key  : Analysis.CPU.mSec
    Value: 953

    Key  : Analysis.Elapsed.mSec
    Value: 4043

    Key  : Analysis.IO.Other.Mb
    Value: 0

    Key  : Analysis.IO.Read.Mb
    Value: 1

    Key  : Analysis.IO.Write.Mb
    Value: 29

    Key  : Analysis.Init.CPU.mSec
    Value: 296

    Key  : Analysis.Init.Elapsed.mSec
    Value: 13407

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 82

    Key  : Analysis.Version.DbgEng
    Value: 10.0.27871.1001

    Key  : Analysis.Version.Description
    Value: 10.2505.01.02 amd64fre

    Key  : Analysis.Version.Ext
    Value: 1.2505.1.2

    Key  : Bugcheck.Code.LegacyAPI
    Value: 0x50

    Key  : Bugcheck.Code.TargetModel
    Value: 0x50

    Key  : Failure.Bucket
    Value: AV_X_(null)_BAD_IP_nt!MiSystemFault

    Key  : Failure.Exception.IP.Address
    Value: 0xffff928d00000001

    Key  : Failure.Hash
    Value: {519102ae-339f-c953-2278-3f0bfcf5aa85}

    Key  : WER.OS.Branch
    Value: vb_release

    Key  : WER.OS.Version
    Value: 10.0.19041.1


BUGCHECK_CODE:  50

BUGCHECK_P1: ffff928d00000001

BUGCHECK_P2: 10

BUGCHECK_P3: ffff928d00000001

BUGCHECK_P4: 2

FILE_IN_CAB:  080625-6796-01.dmp

FAULTING_THREAD:  ffff82873e1a9080

READ_ADDRESS: fffff80644afb390: Unable to get MiVisibleState
Unable to get NonPagedPoolStart
Unable to get NonPagedPoolEnd
Unable to get PagedPoolStart
Unable to get PagedPoolEnd
unable to get nt!MmSpecialPagesInUse
 ffff928d00000001 

MM_INTERNAL_CODE:  2

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  dwm.exe

FAILED_INSTRUCTION_ADDRESS: 
+0
ffff928d`00000001 ??              ???

STACK_TEXT:  
ffff928d`ff036ff8 fffff806`44248823     : 00000000`00000050 ffff928d`00000001 00000000`00000010 ffff928d`ff0372a0 : nt!KeBugCheckEx
ffff928d`ff037000 fffff806`4400d450     : 00000000`00000000 00000000`00000010 ffff928d`ff037320 00000000`00000000 : nt!MiSystemFault+0x1b6da3
ffff928d`ff037100 fffff806`4420d36d     : ffff928d`00000000 00001f80`00100060 dc635963`c7658101 00000000`07015215 : nt!MmAccessFault+0x400
ffff928d`ff0372a0 ffff928d`00000001     : 00000000`00000000 00000000`000000a0 00000000`00000000 00000000`656e6f4e : nt!KiPageFault+0x36d
ffff928d`ff037438 00000000`00000000     : 00000000`000000a0 00000000`00000000 00000000`656e6f4e fffff806`440bc86f : 0xffff928d`00000001


SYMBOL_NAME:  nt!MiSystemFault+1b6da3

MODULE_NAME: nt

IMAGE_VERSION:  10.0.19041.6157

STACK_COMMAND: .process /r /p 0xffff828740df7080; .thread 0xffff82873e1a9080 ; kb

IMAGE_NAME:  ntkrnlmp.exe

BUCKET_ID_FUNC_OFFSET:  1b6da3

FAILURE_BUCKET_ID:  AV_X_(null)_BAD_IP_nt!MiSystemFault

OS_VERSION:  10.0.19041.1

BUILDLAB_STR:  vb_release

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {519102ae-339f-c953-2278-3f0bfcf5aa85}
PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced.  This cannot be protected by try-except.
Typically the address is just plain bad or it is pointing at freed memory.
Arguments:
Arg1: fffff08f68fffff0, memory referenced.
Arg2: 0000000000000002, X64: bit 0 set if the fault was due to a not-present PTE.
    bit 1 is set if the fault was due to a write, clear if a read.
    bit 3 is set if the processor decided the fault was due to a corrupted PTE.
    bit 4 is set if the fault was due to attempted execute of a no-execute PTE.
    - ARM64: bit 1 is set if the fault was due to a write, clear if a read.
    bit 3 is set if the fault was due to attempted execute of a no-execute PTE.
Arg3: fffff800387f9726, If non-zero, the instruction address which referenced the bad memory
    address.
Arg4: 0000000000000002, (reserved)

Debugging Details:
------------------


KEY_VALUES_STRING: 1

    Key  : AV.Type
    Value: Write

    Key  : Analysis.CPU.mSec
    Value: 921

    Key  : Analysis.Elapsed.mSec
    Value: 4336

    Key  : Analysis.IO.Other.Mb
    Value: 0

    Key  : Analysis.IO.Read.Mb
    Value: 1

    Key  : Analysis.IO.Write.Mb
    Value: 21

    Key  : Analysis.Init.CPU.mSec
    Value: 625

    Key  : Analysis.Init.Elapsed.mSec
    Value: 14121

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 84

    Key  : Analysis.Version.DbgEng
    Value: 10.0.27871.1001

    Key  : Analysis.Version.Description
    Value: 10.2505.01.02 amd64fre

    Key  : Analysis.Version.Ext
    Value: 1.2505.1.2

    Key  : Bugcheck.Code.LegacyAPI
    Value: 0x50

    Key  : Bugcheck.Code.TargetModel
    Value: 0x50

    Key  : Failure.Bucket
    Value: AV_W_(null)_FLTMGR!FltpFastIoRead

    Key  : Failure.Exception.IP.Address
    Value: 0xfffff800387f9726

    Key  : Failure.Exception.IP.Module
    Value: FLTMGR

    Key  : Failure.Exception.IP.Offset
    Value: 0x39726

    Key  : Failure.Hash
    Value: {bb8008fc-15e5-4d1d-49c5-2ee03250e3f0}

    Key  : WER.OS.Branch
    Value: vb_release

    Key  : WER.OS.Version
    Value: 10.0.19041.1


BUGCHECK_CODE:  50

BUGCHECK_P1: fffff08f68fffff0

BUGCHECK_P2: 2

BUGCHECK_P3: fffff800387f9726

BUGCHECK_P4: 2

FILE_IN_CAB:  080625-5968-01.dmp

FAULTING_THREAD:  ffffa685c25f5080

READ_ADDRESS: fffff8003b4fb390: Unable to get MiVisibleState
Unable to get NonPagedPoolStart
Unable to get NonPagedPoolEnd
Unable to get PagedPoolStart
Unable to get PagedPoolEnd
unable to get nt!MmSpecialPagesInUse
 fffff08f68fffff0

MM_INTERNAL_CODE:  2

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXPNP: 1 (!blackboxpnp)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  TslGame.exe

STACK_TEXT: 
fffff08f`68f25438 fffff800`3ac48823     : 00000000`00000050 fffff08f`68fffff0 00000000`00000002 fffff08f`68f256e0 : nt!KeBugCheckEx
fffff08f`68f25440 fffff800`3aa0d450     : 00000000`000040ef 00000000`00000002 fffff08f`68f25760 00000000`00000000 : nt!MiSystemFault+0x1b6da3
fffff08f`68f25540 fffff800`3ac0d36d     : fffff08f`68f256e8 ffffa685`c4c46c10 ffff9584`ca5d8370 00000000`00000000 : nt!MmAccessFault+0x400
fffff08f`68f256e0 fffff800`387f9726     : fffff08f`68f26000 fffff08f`68f20000 fffff08f`68f259a8 ffffa685`c4c46c10 : nt!KiPageFault+0x36d
fffff08f`68f25870 fffff800`3adce73d     : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : FLTMGR!FltpFastIoRead+0x176
fffff08f`68f25920 fffff800`3aec9986     : ffffa685`c4c46c10 00000000`00000000 00000000`00000000 00000000`00000000 : nt!IopReadFile+0x425
fffff08f`68f25a10 fffff800`3ac11208     : ffffa685`c25f5080 fffff08f`68f25b80 0000002e`8a93f008 00000189`00000018 : nt!NtReadFile+0xa6
fffff08f`68f25a90 00007ff7`d06373e6     : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x28
0000002e`8a93efe8 00000000`00000000     : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x00007ff7`d06373e6


SYMBOL_NAME:  FLTMGR!FltpFastIoRead+176

MODULE_NAME: FLTMGR

IMAGE_NAME:  FLTMGR.SYS

IMAGE_VERSION:  10.0.19041.6093

STACK_COMMAND: .process /r /p 0xffffa685c3af7080; .thread 0xffffa685c25f5080 ; kb

BUCKET_ID_FUNC_OFFSET:  176

FAILURE_BUCKET_ID:  AV_W_(null)_FLTMGR!FltpFastIoRead

OS_VERSION:  10.0.19041.1

BUILDLAB_STR:  vb_release

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {bb8008fc-15e5-4d1d-49c5-2ee03250e3f0}

Followup:     MachineOwner
---------

    PnpActivityId      : {00000000-0000-0000-0000-000000000000}
    PnpActivityTime    : 133989826004576933
    PnpEventInformation: 3
    PnpEventInProgress : 0
    PnpProblemCode     : 24
    PnpVetoType        : 0
    DeviceId           : DISPLAY\Default_Monitor\1&8713bca&0&UID0
    VetoString         :

[SMBIOS Data Tables v3.3]
[DMI Version - 0]
[2.0 Calling Convention - No]
[Table Size - 1531 bytes]

[BIOS Information (Type 0) - Length 26 - Handle 0000h]
  Vendor                        American Megatrends Inc.
  BIOS Version                  P10.31
  BIOS Starting Address Segment f000
  BIOS Release Date             08/21/2024
  BIOS ROM Size                 1000000
  BIOS Characteristics
       07: - PCI Supported
       11: - Upgradeable FLASH BIOS
       12: - BIOS Shadowing Supported
       15: - CD-Boot Supported
       16: - Selectable Boot Supported
       17: - BIOS ROM Socketed
       19: - EDD Supported
       23: - 1.2MB Floppy Supported
       24: - 720KB Floppy Supported
       25: - 2.88MB Floppy Supported
       26: - Print Screen Device Supported
       27: - Keyboard Services Supported
       28: - Serial Services Supported
       29: - Printer Services Supported
       32: - BIOS Vendor Reserved
  BIOS Characteristic Extensions
       00: - ACPI Supported
       01: - USB Legacy Supported
       08: - BIOS Boot Specification Supported
       10: - Enable Targeted Content Distribution
       11: - UEFI Specification Supported
  BIOS Major Revision           5
  BIOS Minor Revision           17
  EC Firmware Major Revision    255
  EC Firmware Minor Revision    255
  Extended BIOS ROM Size        16 MB
[System Information (Type 1) - Length 27 - Handle 0001h]
  Manufacturer                  To Be Filled By O.E.M.
  Product Name                  B450M-HDV R4.0
  Version                       To Be Filled By O.E.M.
  Serial Number                 To Be Filled By O.E.M.
  UUID                          00000000-0000-0000-0000-000000000000
  Wakeup Type                   Power Switch
  SKUNumber                     To Be Filled By O.E.M.
  Family                        To Be Filled By O.E.M.
[BaseBoard Information (Type 2) - Length 15 - Handle 0002h]
  Manufacturer                  ASRock
  Product                       B450M-HDV R4.0
  Version                                             
  Serial Number                 M80-C8013503153
  Asset Tag                                           
  Feature Flags                 09h
       00: - Motherboard
       03: - Replaceable
  Location                                           
  Chassis Handle                0003h
  Board Type                    0ah - Processor/Memory Module
  Number of Child Handles       0
[System Enclosure (Type 3) - Length 22 - Handle 0003h]
  Manufacturer                  To Be Filled By O.E.M.
  Chassis Type                  Desktop
  Version                       To Be Filled By O.E.M.
  Serial Number                                       
  Asset Tag Number                                   
  Bootup State                  Safe
  Power Supply State            Safe
  Thermal State                 Safe
  Security Status               None
  OEM Defined                   0
  Height                        0U
  Number of Power Cords         1
  Number of Contained Elements  0
  Contained Element Size        3
[OEM Strings (Type 11) - Length 5 - Handle 0007h]
  Number of Strings             1
   1                            To Be Filled By O.E.M.
[ (Type 256) - Length 14 - Handle 0009h]
[ (Type 256) - Length 9 - Handle 000ah]
[ (Type 256) - Length 31 - Handle 000bh]
[32Bit Memory Error Information (Type 18) - Length 23 - Handle 000ch]
[Physical Memory Array (Type 16) - Length 23 - Handle 000dh]
  Location                      03h - SystemBoard/Motherboard
  Use                           03h - System Memory
  Memory Error Correction       03h - None
  Maximum Capacity              134217728KB
  Memory Error Inf Handle       000ch
  Number of Memory Devices      2
[Memory Array Mapped Address (Type 19) - Length 31 - Handle 000eh]
  Starting Address              00000000h
  Ending Address                002fffffh
  Memory Array Handle           000dh
  Partition Width               02
  Extended Starting Address     0000000000000000h
  Extended Ending Address       0000000000000000h
[Memory Array Mapped Address (Type 19) - Length 31 - Handle 000fh]
  Starting Address              00400000h
  Ending Address                010fffffh
  Memory Array Handle           000dh
  Partition Width               02
  Extended Starting Address     0000000000000000h
  Extended Ending Address       0000000000000000h
[Cache Information (Type 7) - Length 27 - Handle 0010h]
  Socket Designation            L1 - Cache
  Cache Configuration           0180h - WBEnabled Int NonSocketed L1
  Maximum Cache Size            0180h - 384K
  Installed Size                0180h - 384K
  Supported SRAM Type           0010h - Pipeline-Burst
  Current SRAM Type             0010h - Pipeline-Burst
  Cache Speed                   1ns
  Error Correction Type         Specification Reserved
  System Cache Type             Unified
  Associativity                 8-way Set-Associative
  Maximum Cache Size 2          180 - 00000384l Kb
  Installed Cache Size 2        180 - 00000384l Kb
[Cache Information (Type 7) - Length 27 - Handle 0011h]
  Socket Designation            L2 - Cache
  Cache Configuration           0181h - WBEnabled Int NonSocketed L2
  Maximum Cache Size            0c00h - 3072K
  Installed Size                0c00h - 3072K
  Supported SRAM Type           0010h - Pipeline-Burst
  Current SRAM Type             0010h - Pipeline-Burst
  Cache Speed                   1ns
  Error Correction Type         Specification Reserved
  System Cache Type             Unified
  Associativity                 8-way Set-Associative
  Maximum Cache Size 2          c00 - 00003072l Kb
  Installed Cache Size 2        c00 - 00003072l Kb
[Cache Information (Type 7) - Length 27 - Handle 0012h]
  Socket Designation            L3 - Cache
  Cache Configuration           0182h - WBEnabled Int NonSocketed L3
  Maximum Cache Size            8200h - 32768K
  Installed Size                8200h - 32768K
  Supported SRAM Type           0010h - Pipeline-Burst
  Current SRAM Type             0010h - Pipeline-Burst
  Cache Speed                   1ns
  Error Correction Type         Specification Reserved
  System Cache Type             Unified
  Associativity                 16-way Set-Associative
  Maximum Cache Size 2          80000200 - 00032768l Kb
  Installed Cache Size 2        80000200 - 00032768l Kb
[Processor Information (Type 4) - Length 48 - Handle 0013h]
  Socket Designation            AM4
  Processor Type                Central Processor
  Processor Family              6bh - AMD Zen Processor Family
  Processor Manufacturer        Advanced Micro Devices, Inc.
  Processor ID                   100f8700fffb8b17
  Processor Version             AMD Ryzen 5 3600X 6-Core Processor             
  Processor Voltage             8bh - 1.1V
  External Clock                100MHz
  Max Speed                     4400MHz
  Current Speed                 4100MHz
  Status                        Enabled Populated
  Processor Upgrade             Socket AM4
  L1 Cache Handle               0010h
  L2 Cache Handle               0011h
  L3 Cache Handle               0012h
  Serial Number                       
  Asset Tag Number                     
  Part Number                   Unknown
  Core Count                    6
  Core Enabled                  6
  Thread Count                  12
  Processor Characteristics     fc
  Enabled Characteristics:
       0x 2: 64-bit Capable
       0x 3: Multi-Core
       0x 4: Hardware Thread
       0x 5: Execute Protection
       0x 6: Enhanced Virtualization
       0x 7: Power/Performance Control
  Processor Family 2            006bh - AMD Zen Processor Family
  Core Count 2                  6
  Core Enabled 2                6
  Thread Count 2                12
[32Bit Memory Error Information (Type 18) - Length 23 - Handle 0014h]
[Memory Device (Type 17) - Length 92 - Handle 0015h]
  Memory Error Info Handle      0014h
  Total Width                   64 bits
  Data Width                    64 bits
  Size                          8192MB
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                DIMM 0
  Bank Locator                  P0 CHANNEL A
  Memory Type                   1ah - DDR4
  Type Detail                   4080h - Synchronous Unbuffered (Unregistered)
  Speed                         3266MHz
  Manufacturer                  Kingston
  Serial Number                         
  Asset Tag Number              [String Not Specified]
  Part Number                   KHX3000C15D4/8GX   
  Attributes                    1
  Extended Size                 0
  Configured Memory Speed       3266
  Minimum Voltage               1200
  Maximum Voltage               1200
  Configured Voltage            1200
  Memory Technology             3
  Memory Operating Mode Capability     8
  Firmware Version              6
  Module Manufacturer Id        38913
  Module Product Id             0
  Memory Subsystem Controller Manufacturer Id  0
  Memory Subsystem Controller Product Id       0
  Non-Volatile Size             0
  Volatile Size                 0
  Cache Size                    0
  Logical Size                  0
  Extended Speed                0
  Extended Configured Memory Speed     0
[Memory Device Mapped Address (Type 20) - Length 35 - Handle 0016h]
  Starting Address              00000000h
  Ending Address                00ffffffh
  Memory Device Handle          0015h
  Mem Array Mapped Adr Handle   000fh
  Partition Row Position        [Unknown]
  Interleave Position           [Unknown]
  Interleave Data Depth         [Unknown]
  Extended Starting Address     0000000000000000h
  Extended Ending Address       0000000000000000h
[32Bit Memory Error Information (Type 18) - Length 23 - Handle 0017h]
[Memory Device (Type 17) - Length 92 - Handle 0018h]
  Memory Error Info Handle      0017h
  Total Width                   64 bits
  Data Width                    64 bits
  Size                          8192MB
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                DIMM 0
  Bank Locator                  P0 CHANNEL B
  Memory Type                   1ah - DDR4
  Type Detail                   4080h - Synchronous Unbuffered (Unregistered)
  Speed                         3266MHz
  Manufacturer                  Kingston
  Serial Number                         
  Asset Tag Number              [String Not Specified]
  Part Number                   KHX3000C15D4/8GX   
  Attributes                    1
  Extended Size                 0
  Configured Memory Speed       3266
  Minimum Voltage               1200
  Maximum Voltage               1200
  Configured Voltage            1200
  Memory Technology             3
  Memory Operating Mode Capability     8
  Firmware Version              6
  Module Manufacturer Id        38913
  Module Product Id             0
  Memory Subsystem Controller Manufacturer Id  0
  Memory Subsystem Controller Product Id       0
  Non-Volatile Size             0
  Volatile Size                 0
  Cache Size                    0
  Logical Size                  0
  Extended Speed                0
  Extended Configured Memory Speed     0
[Memory Device Mapped Address (Type 20) - Length 35 - Handle 0019h]
  Starting Address              00000000h
  Ending Address                00ffffffh
  Memory Device Handle          0018h
  Mem Array Mapped Adr Handle   000fh
  Partition Row Position        [Unknown]
  Interleave Position           [Unknown]
  Interleave Data Depth         [Unknown]
  Extended Starting Address     0000000000000000h
  Extended Ending Address       0000000000000000h
[ (Type 256) - Length 4 - Handle 001ah]

BIOS'tan XMP kapatıp dener misin? Bu da olmazsa çift modül RAM varsa birini çıkar öyle dene. Bir de sıcaklıklar ne durumda oyundayken?
 
  • Anakart: ASRock B450M-HDV R4.0
  • RAM: 2x8 GB Kingston HyperX DDR4 3000MHz (XMP ile 3266 MHz çalışıyor)
  • İşlemci: Ryzen 5 3600X
  • BIOS: P10.31 Beta.
Çözüm önerilerim:

  • 10.42 Beta'ya geçin.
  • Bir de RAM'leriniz KHX3000C15D4/8GX modelinde, ancak 3266 MHz hızında çalışıyor. Bu model XMP ile 3000 MHz için tasarlandı, sizinki XMP ile 3266'ya çekilmiş gibi. XMP kapatıp deneyin.
  • Bellek testi yapın.
Kod:
KERNEL_AUTO_BOOST_LOCK_ACQUISITION_WITH_RAISED_IRQL (192)
A lock tracked by AutoBoost was acquired while executing at DISPATCH_LEVEL or
above.
Arguments:
Arg1: ffffd208ebe3e080, The address of the thread.
Arg2: ffffd208e0bfc9e0, The lock address.
Arg3: 0000000000000000, The IRQL at which the lock was acquired.
Arg4: 0000000000000000, Reserved.

Debugging Details:
------------------


KEY_VALUES_STRING: 1

    Key  : Analysis.CPU.mSec
    Value: 906

    Key  : Analysis.Elapsed.mSec
    Value: 3071

    Key  : Analysis.IO.Other.Mb
    Value: 0

    Key  : Analysis.IO.Read.Mb
    Value: 1

    Key  : Analysis.IO.Write.Mb
    Value: 0

    Key  : Analysis.Init.CPU.mSec
    Value: 343

    Key  : Analysis.Init.Elapsed.mSec
    Value: 1022

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 84

    Key  : Analysis.Version.DbgEng
    Value: 10.0.27871.1001

    Key  : Analysis.Version.Description
    Value: 10.2505.01.02 amd64fre

    Key  : Analysis.Version.Ext
    Value: 1.2505.1.2

    Key  : Bugcheck.Code.LegacyAPI
    Value: 0x192

    Key  : Bugcheck.Code.TargetModel
    Value: 0x192

    Key  : Failure.Bucket
    Value: 0x192_nt!ExAcquireCacheAwarePushLockSharedEx

    Key  : Failure.Hash
    Value: {0b3e94d6-ae37-4afe-1a69-72779fd6e91e}

    Key  : WER.OS.Branch
    Value: vb_release

    Key  : WER.OS.Version
    Value: 10.0.19041.1


BUGCHECK_CODE:  192

BUGCHECK_P1: ffffd208ebe3e080

BUGCHECK_P2: ffffd208e0bfc9e0

BUGCHECK_P3: 0

BUGCHECK_P4: 0

FILE_IN_CAB:  080625-7359-01.dmp

FAULTING_THREAD:  ffffd208ebe3e080

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  WerFault.exe

STACK_TEXT:  
ffff8e80`65337fb8 fffff802`3d0cac6f     : 00000000`00000192 ffffd208`ebe3e080 ffffd208`e0bfc9e0 00000000`00000000 : nt!KeBugCheckEx
ffff8e80`65337fc0 fffff802`3914660d     : ffffd208`f2e96a20 00000000`00000001 00000000`00000000 00000000`00000000 : nt!ExAcquireCacheAwarePushLockSharedEx+0x14f
ffff8e80`65338000 fffff802`39145f7a     : ffff8e80`65338200 ffff8e80`65338102 ffffd208`ed958a00 00000000`00000000 : FLTMGR!FltpPerformPreCallbacksWorker+0x4ad
ffff8e80`65338120 fffff802`39145021     : ffff8e80`65339000 ffff8e80`65333000 ffffd208`e4b49010 ffff8e80`65338230 : FLTMGR!FltpPassThroughInternal+0xca
ffff8e80`65338170 fffff802`39144a2b     : ffffffff`fffe7960 00000000`00000000 ffffd208`e4b49010 ffff8e80`653388a0 : FLTMGR!FltpPassThrough+0x541
ffff8e80`65338200 fffff802`3d0d2205     : ffffd208`ed958a00 fffff802`3d0d52d8 ffffd208`e463a3b0 00000000`00000000 : FLTMGR!FltpDispatch+0x8b
ffff8e80`65338260 fffff802`3d450d1f     : ffffd208`ed958a00 ffffd208`e463a3b0 ffffd208`e4507d60 ffffd208`e4507d60 : nt!IofCallDriver+0x55
ffff8e80`653382a0 fffff802`3d43d9a0     : ffffd208`df4c5140 00000000`00000000 ffffd208`ed9589d0 ffffd208`e4b49010 : nt!IopDeleteFile+0x14f
ffff8e80`65338320 fffff802`3d0cb957     : 00000000`00000000 00000000`00000000 ffff8e80`65338650 ffffd208`ed958a00 : nt!ObpRemoveObjectRoutine+0x80
ffff8e80`65338380 fffff802`3d0cb87e     : fffff802`39177200 00000000`00000001 ffff8e80`653388a0 00000000`00000001 : nt!ObfDereferenceObjectWithTag+0xc7
ffff8e80`653383c0 fffff802`3d450287     : ffffd208`ed958a00 00000000`00000000 00000000`eeda2a45 fffff802`39177200 : nt!HalPutDmaAdapter+0xe
ffff8e80`653383f0 fffff802`3d442517     : ffffd208`e45858f0 fffff802`39177200 ffffd208`eeda2a20 ffffbd0a`679f0601 : nt!IopParseDevice+0x1e27
ffff8e80`65338550 fffff802`3d4ce9aa     : ffffd208`eeda2a01 ffff8e80`653387b8 00000000`00000040 ffffd208`df4c5140 : nt!ObpLookupObjectName+0x1117
ffff8e80`65338720 fffff802`3d40ca75     : ffff8e80`00000000 000000fb`71ef7960 000000fb`71ef7f01 000000fb`71ef7930 : nt!ObOpenObjectByNameEx+0x1fa
ffff8e80`65338850 fffff802`3d211308     : 000000fb`71ef8100 ffff8e80`65338b80 ffffd208`ebe3e080 000002d2`22c32280 : nt!NtQueryAttributesFile+0x1c5
ffff8e80`65338b00 00007ffe`fc5adc94     : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x28
000000fb`71ef78b8 00000000`00000000     : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x00007ffe`fc5adc94


SYMBOL_NAME:  nt!ExAcquireCacheAwarePushLockSharedEx+14f

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

IMAGE_VERSION:  10.0.19041.6093

STACK_COMMAND: .process /r /p 0xffffd208ef8b7340; .thread 0xffffd208ebe3e080 ; kb

BUCKET_ID_FUNC_OFFSET:  14f

FAILURE_BUCKET_ID:  0x192_nt!ExAcquireCacheAwarePushLockSharedEx

OS_VERSION:  10.0.19041.1

BUILDLAB_STR:  vb_release

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {0b3e94d6-ae37-4afe-1a69-72779fd6e91e}

KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common BugCheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff8041a21e7c8, The address that the exception occurred at
Arg3: 0000000000000000, Parameter 0 of the exception
Arg4: ffffffffffffffff, Parameter 1 of the exception

Debugging Details:
------------------

*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ExceptionRecord                               ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ContextRecord                                 ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ExceptionRecord                               ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ContextRecord                                 ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ExceptionRecord                               ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ContextRecord                                 ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ExceptionRecord                               ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that     ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ContextRecord                                 ***
***                                                                   ***
*************************************************************************

KEY_VALUES_STRING: 1

    Key  : Analysis.CPU.mSec
    Value: 1390

    Key  : Analysis.Elapsed.mSec
    Value: 1420

    Key  : Analysis.IO.Other.Mb
    Value: 0

    Key  : Analysis.IO.Read.Mb
    Value: 1

    Key  : Analysis.IO.Write.Mb
    Value: 18

    Key  : Analysis.Init.CPU.mSec
    Value: 453

    Key  : Analysis.Init.Elapsed.mSec
    Value: 9513

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 76

    Key  : Analysis.Version.DbgEng
    Value: 10.0.27871.1001

    Key  : Analysis.Version.Description
    Value: 10.2505.01.02 amd64fre

    Key  : Analysis.Version.Ext
    Value: 1.2505.1.2

    Key  : Bugcheck.Code.LegacyAPI
    Value: 0x1e

    Key  : Bugcheck.Code.TargetModel
    Value: 0x1e

    Key  : Failure.Bucket
    Value: AV_R_nt!RtlpUnwindPrologue

    Key  : Failure.Exception.IP.Address
    Value: 0xfffff8041a21e7c8

    Key  : Failure.Exception.IP.Module
    Value: nt

    Key  : Failure.Exception.IP.Offset
    Value: 0x21e7c8

    Key  : Failure.Hash
    Value: {225f562a-9f02-8c97-d664-bd68a50e4c7f}

    Key  : Stack.Pointer
    Value: PRCBException

    Key  : WER.OS.Branch
    Value: vb_release

    Key  : WER.OS.Version
    Value: 10.0.19041.1


BUGCHECK_CODE:  1e

BUGCHECK_P1: ffffffffc0000005

BUGCHECK_P2: fffff8041a21e7c8

BUGCHECK_P3: 0

BUGCHECK_P4: ffffffffffffffff

FILE_IN_CAB:  080625-6031-01.dmp

FAULTING_THREAD:  ffff9d07dbf7e080

EXCEPTION_PARAMETER1:  0000000000000000

EXCEPTION_PARAMETER2:  ffffffffffffffff

READ_ADDRESS: fffff8041acfb390: Unable to get MiVisibleState
Unable to get NonPagedPoolStart
Unable to get NonPagedPoolEnd
Unable to get PagedPoolStart
Unable to get PagedPoolEnd
unable to get nt!MmSpecialPagesInUse
 ffffffffffffffff 

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXPNP: 1 (!blackboxpnp)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  TslGame.exe

STACK_TEXT:  
ffffb800`63fc4ea8 fffff804`1a474ff2     : 00000000`0000001e ffffffff`c0000005 fffff804`1a21e7c8 00000000`00000000 : nt!KeBugCheckEx
ffffb800`63fc4eb0 fffff804`1a407db2     : fffff804`1a31d55c 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiExceptionStackSwitchHandler+0x157a96
ffffb800`63fc4ef0 fffff804`1a33e817     : ffffb800`63fc5460 00000000`00000000 ffffb800`63fc6fb0 fffff804`1a3fe3d2 : nt!RtlpExecuteHandlerForException+0x12
ffffb800`63fc4f20 fffff804`1a33c4b6     : ffffb800`63fc5e38 ffffb800`63fc5b70 ffffb800`63fc5e38 fffff804`1a0b0b60 : nt!RtlDispatchException+0x297
ffffb800`63fc5640 fffff804`1a411bec     : 00000073`006c006e 00000070`00000030 00060000`00000000 00010018`00000056 : nt!KiDispatchException+0x186
ffffb800`63fc5d00 fffff804`1a40cfef     : 00000000`00000000 ffffb800`63fc5f78 00000001`00000010 0000ffff`f8041a3c : nt!KiExceptionDispatch+0x12c
ffffb800`63fc5ee0 fffff804`1a21e7c8     : 00000000`00000000 fffff804`1a32b5f1 00000000`0000011c 00000000`00000000 : nt!KiGeneralProtectionFault+0x32f
ffffb800`63fc6070 fffff804`1a21e234     : fffff804`1a000000 fffff804`00000000 df745c7a`edea3418 00007fff`fffeffff : nt!RtlpUnwindPrologue+0x248
ffffb800`63fc60d0 fffff804`1a33ea2f     : fffff804`1a0e4f40 ffffb800`00000000 ffffb800`63fc6760 fffff804`1a0e4f40 : nt!RtlpxVirtualUnwind+0x104
ffffb800`63fc6150 fffff804`1a33e74e     : ffffb800`63fc6710 00000000`00000000 ffffc908`f4292a90 fffff804`1a411208 : nt!RtlVirtualUnwind+0x5f
ffffb800`63fc61d0 fffff804`1a33c4b6     : ffffc908`f4292588 ffffb800`63fc6e20 ffffc908`f4292588 00000297`efd90000 : nt!RtlDispatchException+0x1ce
ffffb800`63fc68f0 00000000`00000000     : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiDispatchException+0x186


SYMBOL_NAME:  nt!RtlpUnwindPrologue+248

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

IMAGE_VERSION:  10.0.19041.6157

STACK_COMMAND: .process /r /p 0xffff9d07dc99c080; .thread 0xffff9d07dbf7e080 ; kb

BUCKET_ID_FUNC_OFFSET:  248

FAILURE_BUCKET_ID:  AV_R_nt!RtlpUnwindPrologue

OS_VERSION:  10.0.19041.1

BUILDLAB_STR:  vb_release

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {225f562a-9f02-8c97-d664-bd68a50e4c7f}

Followup:     MachineOwner
---------

    PnpActivityId      : {00000000-0000-0000-0000-000000000000}
    PnpActivityTime    : 133989816157148193
    PnpEventInformation: 2
    PnpEventInProgress : 0
    PnpProblemCode     : 24
    PnpVetoType        : 0
    DeviceId           : STORAGE\Volume\{35cbbb88-7222-11f0-b11a-806e6f6e6963}#0000000000100000
    VetoString         : 

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced.  This cannot be protected by try-except.
Typically the address is just plain bad or it is pointing at freed memory.
Arguments:
Arg1: ffff928d00000001, memory referenced.
Arg2: 0000000000000010, X64: bit 0 set if the fault was due to a not-present PTE.
    bit 1 is set if the fault was due to a write, clear if a read.
    bit 3 is set if the processor decided the fault was due to a corrupted PTE.
    bit 4 is set if the fault was due to attempted execute of a no-execute PTE.
    - ARM64: bit 1 is set if the fault was due to a write, clear if a read.
    bit 3 is set if the fault was due to attempted execute of a no-execute PTE.
Arg3: ffff928d00000001, If non-zero, the instruction address which referenced the bad memory
    address.
Arg4: 0000000000000002, (reserved)

Debugging Details:
------------------


KEY_VALUES_STRING: 1

    Key  : AV.Type
    Value: Execute

    Key  : Analysis.CPU.mSec
    Value: 953

    Key  : Analysis.Elapsed.mSec
    Value: 4043

    Key  : Analysis.IO.Other.Mb
    Value: 0

    Key  : Analysis.IO.Read.Mb
    Value: 1

    Key  : Analysis.IO.Write.Mb
    Value: 29

    Key  : Analysis.Init.CPU.mSec
    Value: 296

    Key  : Analysis.Init.Elapsed.mSec
    Value: 13407

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 82

    Key  : Analysis.Version.DbgEng
    Value: 10.0.27871.1001

    Key  : Analysis.Version.Description
    Value: 10.2505.01.02 amd64fre

    Key  : Analysis.Version.Ext
    Value: 1.2505.1.2

    Key  : Bugcheck.Code.LegacyAPI
    Value: 0x50

    Key  : Bugcheck.Code.TargetModel
    Value: 0x50

    Key  : Failure.Bucket
    Value: AV_X_(null)_BAD_IP_nt!MiSystemFault

    Key  : Failure.Exception.IP.Address
    Value: 0xffff928d00000001

    Key  : Failure.Hash
    Value: {519102ae-339f-c953-2278-3f0bfcf5aa85}

    Key  : WER.OS.Branch
    Value: vb_release

    Key  : WER.OS.Version
    Value: 10.0.19041.1


BUGCHECK_CODE:  50

BUGCHECK_P1: ffff928d00000001

BUGCHECK_P2: 10

BUGCHECK_P3: ffff928d00000001

BUGCHECK_P4: 2

FILE_IN_CAB:  080625-6796-01.dmp

FAULTING_THREAD:  ffff82873e1a9080

READ_ADDRESS: fffff80644afb390: Unable to get MiVisibleState
Unable to get NonPagedPoolStart
Unable to get NonPagedPoolEnd
Unable to get PagedPoolStart
Unable to get PagedPoolEnd
unable to get nt!MmSpecialPagesInUse
 ffff928d00000001 

MM_INTERNAL_CODE:  2

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  dwm.exe

FAILED_INSTRUCTION_ADDRESS: 
+0
ffff928d`00000001 ??              ???

STACK_TEXT:  
ffff928d`ff036ff8 fffff806`44248823     : 00000000`00000050 ffff928d`00000001 00000000`00000010 ffff928d`ff0372a0 : nt!KeBugCheckEx
ffff928d`ff037000 fffff806`4400d450     : 00000000`00000000 00000000`00000010 ffff928d`ff037320 00000000`00000000 : nt!MiSystemFault+0x1b6da3
ffff928d`ff037100 fffff806`4420d36d     : ffff928d`00000000 00001f80`00100060 dc635963`c7658101 00000000`07015215 : nt!MmAccessFault+0x400
ffff928d`ff0372a0 ffff928d`00000001     : 00000000`00000000 00000000`000000a0 00000000`00000000 00000000`656e6f4e : nt!KiPageFault+0x36d
ffff928d`ff037438 00000000`00000000     : 00000000`000000a0 00000000`00000000 00000000`656e6f4e fffff806`440bc86f : 0xffff928d`00000001


SYMBOL_NAME:  nt!MiSystemFault+1b6da3

MODULE_NAME: nt

IMAGE_VERSION:  10.0.19041.6157

STACK_COMMAND: .process /r /p 0xffff828740df7080; .thread 0xffff82873e1a9080 ; kb

IMAGE_NAME:  ntkrnlmp.exe

BUCKET_ID_FUNC_OFFSET:  1b6da3

FAILURE_BUCKET_ID:  AV_X_(null)_BAD_IP_nt!MiSystemFault

OS_VERSION:  10.0.19041.1

BUILDLAB_STR:  vb_release

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {519102ae-339f-c953-2278-3f0bfcf5aa85}
PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced.  This cannot be protected by try-except.
Typically the address is just plain bad or it is pointing at freed memory.
Arguments:
Arg1: fffff08f68fffff0, memory referenced.
Arg2: 0000000000000002, X64: bit 0 set if the fault was due to a not-present PTE.
    bit 1 is set if the fault was due to a write, clear if a read.
    bit 3 is set if the processor decided the fault was due to a corrupted PTE.
    bit 4 is set if the fault was due to attempted execute of a no-execute PTE.
    - ARM64: bit 1 is set if the fault was due to a write, clear if a read.
    bit 3 is set if the fault was due to attempted execute of a no-execute PTE.
Arg3: fffff800387f9726, If non-zero, the instruction address which referenced the bad memory
    address.
Arg4: 0000000000000002, (reserved)

Debugging Details:
------------------


KEY_VALUES_STRING: 1

    Key  : AV.Type
    Value: Write

    Key  : Analysis.CPU.mSec
    Value: 921

    Key  : Analysis.Elapsed.mSec
    Value: 4336

    Key  : Analysis.IO.Other.Mb
    Value: 0

    Key  : Analysis.IO.Read.Mb
    Value: 1

    Key  : Analysis.IO.Write.Mb
    Value: 21

    Key  : Analysis.Init.CPU.mSec
    Value: 625

    Key  : Analysis.Init.Elapsed.mSec
    Value: 14121

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 84

    Key  : Analysis.Version.DbgEng
    Value: 10.0.27871.1001

    Key  : Analysis.Version.Description
    Value: 10.2505.01.02 amd64fre

    Key  : Analysis.Version.Ext
    Value: 1.2505.1.2

    Key  : Bugcheck.Code.LegacyAPI
    Value: 0x50

    Key  : Bugcheck.Code.TargetModel
    Value: 0x50

    Key  : Failure.Bucket
    Value: AV_W_(null)_FLTMGR!FltpFastIoRead

    Key  : Failure.Exception.IP.Address
    Value: 0xfffff800387f9726

    Key  : Failure.Exception.IP.Module
    Value: FLTMGR

    Key  : Failure.Exception.IP.Offset
    Value: 0x39726

    Key  : Failure.Hash
    Value: {bb8008fc-15e5-4d1d-49c5-2ee03250e3f0}

    Key  : WER.OS.Branch
    Value: vb_release

    Key  : WER.OS.Version
    Value: 10.0.19041.1


BUGCHECK_CODE:  50

BUGCHECK_P1: fffff08f68fffff0

BUGCHECK_P2: 2

BUGCHECK_P3: fffff800387f9726

BUGCHECK_P4: 2

FILE_IN_CAB:  080625-5968-01.dmp

FAULTING_THREAD:  ffffa685c25f5080

READ_ADDRESS: fffff8003b4fb390: Unable to get MiVisibleState
Unable to get NonPagedPoolStart
Unable to get NonPagedPoolEnd
Unable to get PagedPoolStart
Unable to get PagedPoolEnd
unable to get nt!MmSpecialPagesInUse
 fffff08f68fffff0

MM_INTERNAL_CODE:  2

BLACKBOXBSD: 1 (!blackboxbsd)


BLACKBOXNTFS: 1 (!blackboxntfs)


BLACKBOXPNP: 1 (!blackboxpnp)


BLACKBOXWINLOGON: 1

CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  TslGame.exe

STACK_TEXT: 
fffff08f`68f25438 fffff800`3ac48823     : 00000000`00000050 fffff08f`68fffff0 00000000`00000002 fffff08f`68f256e0 : nt!KeBugCheckEx
fffff08f`68f25440 fffff800`3aa0d450     : 00000000`000040ef 00000000`00000002 fffff08f`68f25760 00000000`00000000 : nt!MiSystemFault+0x1b6da3
fffff08f`68f25540 fffff800`3ac0d36d     : fffff08f`68f256e8 ffffa685`c4c46c10 ffff9584`ca5d8370 00000000`00000000 : nt!MmAccessFault+0x400
fffff08f`68f256e0 fffff800`387f9726     : fffff08f`68f26000 fffff08f`68f20000 fffff08f`68f259a8 ffffa685`c4c46c10 : nt!KiPageFault+0x36d
fffff08f`68f25870 fffff800`3adce73d     : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : FLTMGR!FltpFastIoRead+0x176
fffff08f`68f25920 fffff800`3aec9986     : ffffa685`c4c46c10 00000000`00000000 00000000`00000000 00000000`00000000 : nt!IopReadFile+0x425
fffff08f`68f25a10 fffff800`3ac11208     : ffffa685`c25f5080 fffff08f`68f25b80 0000002e`8a93f008 00000189`00000018 : nt!NtReadFile+0xa6
fffff08f`68f25a90 00007ff7`d06373e6     : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x28
0000002e`8a93efe8 00000000`00000000     : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x00007ff7`d06373e6


SYMBOL_NAME:  FLTMGR!FltpFastIoRead+176

MODULE_NAME: FLTMGR

IMAGE_NAME:  FLTMGR.SYS

IMAGE_VERSION:  10.0.19041.6093

STACK_COMMAND: .process /r /p 0xffffa685c3af7080; .thread 0xffffa685c25f5080 ; kb

BUCKET_ID_FUNC_OFFSET:  176

FAILURE_BUCKET_ID:  AV_W_(null)_FLTMGR!FltpFastIoRead

OS_VERSION:  10.0.19041.1

BUILDLAB_STR:  vb_release

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {bb8008fc-15e5-4d1d-49c5-2ee03250e3f0}

Followup:     MachineOwner
---------

    PnpActivityId      : {00000000-0000-0000-0000-000000000000}
    PnpActivityTime    : 133989826004576933
    PnpEventInformation: 3
    PnpEventInProgress : 0
    PnpProblemCode     : 24
    PnpVetoType        : 0
    DeviceId           : DISPLAY\Default_Monitor\1&8713bca&0&UID0
    VetoString         :

[SMBIOS Data Tables v3.3]
[DMI Version - 0]
[2.0 Calling Convention - No]
[Table Size - 1531 bytes]

[BIOS Information (Type 0) - Length 26 - Handle 0000h]
  Vendor                        American Megatrends Inc.
  BIOS Version                  P10.31
  BIOS Starting Address Segment f000
  BIOS Release Date             08/21/2024
  BIOS ROM Size                 1000000
  BIOS Characteristics
       07: - PCI Supported
       11: - Upgradeable FLASH BIOS
       12: - BIOS Shadowing Supported
       15: - CD-Boot Supported
       16: - Selectable Boot Supported
       17: - BIOS ROM Socketed
       19: - EDD Supported
       23: - 1.2MB Floppy Supported
       24: - 720KB Floppy Supported
       25: - 2.88MB Floppy Supported
       26: - Print Screen Device Supported
       27: - Keyboard Services Supported
       28: - Serial Services Supported
       29: - Printer Services Supported
       32: - BIOS Vendor Reserved
  BIOS Characteristic Extensions
       00: - ACPI Supported
       01: - USB Legacy Supported
       08: - BIOS Boot Specification Supported
       10: - Enable Targeted Content Distribution
       11: - UEFI Specification Supported
  BIOS Major Revision           5
  BIOS Minor Revision           17
  EC Firmware Major Revision    255
  EC Firmware Minor Revision    255
  Extended BIOS ROM Size        16 MB
[System Information (Type 1) - Length 27 - Handle 0001h]
  Manufacturer                  To Be Filled By O.E.M.
  Product Name                  B450M-HDV R4.0
  Version                       To Be Filled By O.E.M.
  Serial Number                 To Be Filled By O.E.M.
  UUID                          00000000-0000-0000-0000-000000000000
  Wakeup Type                   Power Switch
  SKUNumber                     To Be Filled By O.E.M.
  Family                        To Be Filled By O.E.M.
[BaseBoard Information (Type 2) - Length 15 - Handle 0002h]
  Manufacturer                  ASRock
  Product                       B450M-HDV R4.0
  Version                                             
  Serial Number                 M80-C8013503153
  Asset Tag                                           
  Feature Flags                 09h
       00: - Motherboard
       03: - Replaceable
  Location                                           
  Chassis Handle                0003h
  Board Type                    0ah - Processor/Memory Module
  Number of Child Handles       0
[System Enclosure (Type 3) - Length 22 - Handle 0003h]
  Manufacturer                  To Be Filled By O.E.M.
  Chassis Type                  Desktop
  Version                       To Be Filled By O.E.M.
  Serial Number                                       
  Asset Tag Number                                   
  Bootup State                  Safe
  Power Supply State            Safe
  Thermal State                 Safe
  Security Status               None
  OEM Defined                   0
  Height                        0U
  Number of Power Cords         1
  Number of Contained Elements  0
  Contained Element Size        3
[OEM Strings (Type 11) - Length 5 - Handle 0007h]
  Number of Strings             1
   1                            To Be Filled By O.E.M.
[ (Type 256) - Length 14 - Handle 0009h]
[ (Type 256) - Length 9 - Handle 000ah]
[ (Type 256) - Length 31 - Handle 000bh]
[32Bit Memory Error Information (Type 18) - Length 23 - Handle 000ch]
[Physical Memory Array (Type 16) - Length 23 - Handle 000dh]
  Location                      03h - SystemBoard/Motherboard
  Use                           03h - System Memory
  Memory Error Correction       03h - None
  Maximum Capacity              134217728KB
  Memory Error Inf Handle       000ch
  Number of Memory Devices      2
[Memory Array Mapped Address (Type 19) - Length 31 - Handle 000eh]
  Starting Address              00000000h
  Ending Address                002fffffh
  Memory Array Handle           000dh
  Partition Width               02
  Extended Starting Address     0000000000000000h
  Extended Ending Address       0000000000000000h
[Memory Array Mapped Address (Type 19) - Length 31 - Handle 000fh]
  Starting Address              00400000h
  Ending Address                010fffffh
  Memory Array Handle           000dh
  Partition Width               02
  Extended Starting Address     0000000000000000h
  Extended Ending Address       0000000000000000h
[Cache Information (Type 7) - Length 27 - Handle 0010h]
  Socket Designation            L1 - Cache
  Cache Configuration           0180h - WBEnabled Int NonSocketed L1
  Maximum Cache Size            0180h - 384K
  Installed Size                0180h - 384K
  Supported SRAM Type           0010h - Pipeline-Burst
  Current SRAM Type             0010h - Pipeline-Burst
  Cache Speed                   1ns
  Error Correction Type         Specification Reserved
  System Cache Type             Unified
  Associativity                 8-way Set-Associative
  Maximum Cache Size 2          180 - 00000384l Kb
  Installed Cache Size 2        180 - 00000384l Kb
[Cache Information (Type 7) - Length 27 - Handle 0011h]
  Socket Designation            L2 - Cache
  Cache Configuration           0181h - WBEnabled Int NonSocketed L2
  Maximum Cache Size            0c00h - 3072K
  Installed Size                0c00h - 3072K
  Supported SRAM Type           0010h - Pipeline-Burst
  Current SRAM Type             0010h - Pipeline-Burst
  Cache Speed                   1ns
  Error Correction Type         Specification Reserved
  System Cache Type             Unified
  Associativity                 8-way Set-Associative
  Maximum Cache Size 2          c00 - 00003072l Kb
  Installed Cache Size 2        c00 - 00003072l Kb
[Cache Information (Type 7) - Length 27 - Handle 0012h]
  Socket Designation            L3 - Cache
  Cache Configuration           0182h - WBEnabled Int NonSocketed L3
  Maximum Cache Size            8200h - 32768K
  Installed Size                8200h - 32768K
  Supported SRAM Type           0010h - Pipeline-Burst
  Current SRAM Type             0010h - Pipeline-Burst
  Cache Speed                   1ns
  Error Correction Type         Specification Reserved
  System Cache Type             Unified
  Associativity                 16-way Set-Associative
  Maximum Cache Size 2          80000200 - 00032768l Kb
  Installed Cache Size 2        80000200 - 00032768l Kb
[Processor Information (Type 4) - Length 48 - Handle 0013h]
  Socket Designation            AM4
  Processor Type                Central Processor
  Processor Family              6bh - AMD Zen Processor Family
  Processor Manufacturer        Advanced Micro Devices, Inc.
  Processor ID                   100f8700fffb8b17
  Processor Version             AMD Ryzen 5 3600X 6-Core Processor             
  Processor Voltage             8bh - 1.1V
  External Clock                100MHz
  Max Speed                     4400MHz
  Current Speed                 4100MHz
  Status                        Enabled Populated
  Processor Upgrade             Socket AM4
  L1 Cache Handle               0010h
  L2 Cache Handle               0011h
  L3 Cache Handle               0012h
  Serial Number                       
  Asset Tag Number                     
  Part Number                   Unknown
  Core Count                    6
  Core Enabled                  6
  Thread Count                  12
  Processor Characteristics     fc
  Enabled Characteristics:
       0x 2: 64-bit Capable
       0x 3: Multi-Core
       0x 4: Hardware Thread
       0x 5: Execute Protection
       0x 6: Enhanced Virtualization
       0x 7: Power/Performance Control
  Processor Family 2            006bh - AMD Zen Processor Family
  Core Count 2                  6
  Core Enabled 2                6
  Thread Count 2                12
[32Bit Memory Error Information (Type 18) - Length 23 - Handle 0014h]
[Memory Device (Type 17) - Length 92 - Handle 0015h]
  Memory Error Info Handle      0014h
  Total Width                   64 bits
  Data Width                    64 bits
  Size                          8192MB
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                DIMM 0
  Bank Locator                  P0 CHANNEL A
  Memory Type                   1ah - DDR4
  Type Detail                   4080h - Synchronous Unbuffered (Unregistered)
  Speed                         3266MHz
  Manufacturer                  Kingston
  Serial Number                         
  Asset Tag Number              [String Not Specified]
  Part Number                   KHX3000C15D4/8GX   
  Attributes                    1
  Extended Size                 0
  Configured Memory Speed       3266
  Minimum Voltage               1200
  Maximum Voltage               1200
  Configured Voltage            1200
  Memory Technology             3
  Memory Operating Mode Capability     8
  Firmware Version              6
  Module Manufacturer Id        38913
  Module Product Id             0
  Memory Subsystem Controller Manufacturer Id  0
  Memory Subsystem Controller Product Id       0
  Non-Volatile Size             0
  Volatile Size                 0
  Cache Size                    0
  Logical Size                  0
  Extended Speed                0
  Extended Configured Memory Speed     0
[Memory Device Mapped Address (Type 20) - Length 35 - Handle 0016h]
  Starting Address              00000000h
  Ending Address                00ffffffh
  Memory Device Handle          0015h
  Mem Array Mapped Adr Handle   000fh
  Partition Row Position        [Unknown]
  Interleave Position           [Unknown]
  Interleave Data Depth         [Unknown]
  Extended Starting Address     0000000000000000h
  Extended Ending Address       0000000000000000h
[32Bit Memory Error Information (Type 18) - Length 23 - Handle 0017h]
[Memory Device (Type 17) - Length 92 - Handle 0018h]
  Memory Error Info Handle      0017h
  Total Width                   64 bits
  Data Width                    64 bits
  Size                          8192MB
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                DIMM 0
  Bank Locator                  P0 CHANNEL B
  Memory Type                   1ah - DDR4
  Type Detail                   4080h - Synchronous Unbuffered (Unregistered)
  Speed                         3266MHz
  Manufacturer                  Kingston
  Serial Number                         
  Asset Tag Number              [String Not Specified]
  Part Number                   KHX3000C15D4/8GX   
  Attributes                    1
  Extended Size                 0
  Configured Memory Speed       3266
  Minimum Voltage               1200
  Maximum Voltage               1200
  Configured Voltage            1200
  Memory Technology             3
  Memory Operating Mode Capability     8
  Firmware Version              6
  Module Manufacturer Id        38913
  Module Product Id             0
  Memory Subsystem Controller Manufacturer Id  0
  Memory Subsystem Controller Product Id       0
  Non-Volatile Size             0
  Volatile Size                 0
  Cache Size                    0
  Logical Size                  0
  Extended Speed                0
  Extended Configured Memory Speed     0
[Memory Device Mapped Address (Type 20) - Length 35 - Handle 0019h]
  Starting Address              00000000h
  Ending Address                00ffffffh
  Memory Device Handle          0018h
  Mem Array Mapped Adr Handle   000fh
  Partition Row Position        [Unknown]
  Interleave Position           [Unknown]
  Interleave Data Depth         [Unknown]
  Extended Starting Address     0000000000000000h
  Extended Ending Address       0000000000000000h
[ (Type 256) - Length 4 - Handle 001ah]
 
Çözüm
Teşekkür ederim, sorun çözüldü. XMP profili devre dışı bıraktım. Ayrıca işlemci frekansını manuel olarak 4.1 GHz'e sabitlemiştim; bu ayarı varsayılan (otomatik) moda aldım. Ardından iki oyun test ettim. Şu anda sistem, arka planda antrenman modunda sorunsuz şekilde çalışıyor.

BIOS'tan XMP kapatıp dener misin? Bu da olmazsa çift modül RAM varsa birini çıkar öyle dene. Bir de sıcaklıklar ne durumda oyundayken?
İşlemci sıcaklığım, oyun esnasında maksimum 56 dereceye ulaşıyor. Ekran kartı sıcaklığım ise 73 derece seviyelerine kadar çıkıyor. Ekran kartı, Asus TUF serisi
 

Sıcaklıklar gayet güzelmiş hocam. Sorununuzun çözüldüğüne sevindim. Hayırlı akşamlar dilerim.
 
Bu siteyi kullanmak için çerezler gereklidir. Siteyi kullanmaya devam etmek için çerezleri kabul etmelisiniz. Daha Fazlasını Öğren.…