pfSense kurulumunda gateway farklı subnet – kurulum ekranında kaldı

*** Welcome to pfSense 2.8.0-RELEASE (amd64) on TestFirewall ***

 WAN (wan) -> vmx0 -> v4: 192.168.1.10/24
 LAN (lan) -> vmx1 -> v4: 10.1.1.1/24

 0) Logout / Disconnect SSH            9) pfTop
 1) Assign Interfaces                 10) Filter Logs
 2) Set interface(s) IP address       11) Restart GUI
 3) Reset admin account and password  12) PHP shell + pfSense tools
 4) Reset to factory defaults         13) Update from console
 5) Reboot system                     14) Disable Secure Shell (sshd)
 6) Halt system                       15) Restore recent configuration
 7) Ping host                         16) Restart PHP-FPM
 8) Shell

Enter an option: 2

Available interfaces:

1 - WAN (vmx0 - static)
2 - LAN (vmx1 - static)

Enter the number of the interface you wish to configure: 1

Configure IPv4 address WAN interface via DHCP? (y/n) n

Enter the new WAN IPv4 address.  Press <ENTER> for none:
> 15.242.38.2

Subnet masks are entered as bit counts (as in CIDR notation) in pfSense.
e.g. 255.255.255.0 = 24
     255.255.0.0   = 16
     255.0.0.0     = 8

Enter the new WAN IPv4 subnet bit count (1 to 32):
> 24

For a WAN, enter the new WAN IPv4 upstream gateway address.
For a LAN, press <ENTER> for none:
> 15.243.38.1

Should this gateway be set as the default gateway? (y/n) y

Configure IPv6 address WAN interface via DHCP6? (y/n) n

Enter the new WAN IPv6 address.  Press <ENTER> for none:
>

Do you want to enable the DHCP server on WAN? (y/n) n
Disabling IPv4 DHCPD...
Disabling IPv6 DHCPD...

Do you want to revert to HTTP as the webConfigurator protocol? (y/n) y

Please wait while the changes are saved to WAN...
 Reloading filter...
 Reloading routing configuration...
 DHCPD...
 Restarting webConfigurator...

The IPv4 WAN address has been set to 15.243.38.2/24

Press <ENTER> to continue.

*** Welcome to pfSense 2.8.0-RELEASE (amd64) on TestFirewall ***

 WAN (wan) -> vmx0 -> v4: 15.242.38.2/24
 LAN (lan) -> vmx1 -> v4: 10.1.1.1/24

 0) Logout / Disconnect SSH            9) pfTop
 1) Assign Interfaces                 10) Filter Logs
 2) Set interface(s) IP address       11) Restart GUI
 3) Reset admin account and password  12) PHP shell + pfSense tools
 4) Reset to factory defaults         13) Update from console
 5) Reboot system                     14) Disable Secure Shell (sshd)
 6) Halt system                       15) Restore recent configuration
 7) Ping host                         16) Restart PHP-FPM
 8) Shell