Patriot Viper Xtreme 5 RAM için timing ayarı önerisi

Ayhan Dönmez · Dün 18:22

Diego_Pasha dedi:
Abi ilk fotoğrafta yuvarlak çizdim, bir o diğer arkadaşın attığı fotoğrafta yok da oraya ne yazmam lazım? Gerisi tamam, akşam işten çıkınca ayarlayacağım.

16 yeterli o kısma. Ryzen 7000'de WR yok.

Diego_Pasha · Dün 18:38

Ayhan Dönmez dedi:
16 yeterli o kısma. Ryzen 7000'de wr yok.

Yapay zekaya ayarları attım yapmam gerekenleri sırala dedim doğru mu abi ona göre uygulayacağım.

BIOS'ta gireceğin değerler

OC → DRAM Frequency

DDR5-6000

OC → FCLK Frequency

2000 MHz

OC → UCLK DIV1 MODE

UCLK=MCLK

OC → Advanced DRAM Configuration → Main Timing Configuration

tCL → 28
tRCDWR → 36
tRCDRD → 36
tRP → 32
tRAS → 60
tRC → Auto
tWR → 48
tRFC1 → 420
tRFC2 → Auto
tRFCsb → Auto

OC → Advanced DRAM Configuration → Sub Timing Configuration

tRTP → 12
tRRDS → 4
tRRDL → 8
tFAW → 20
tWTRS → 6
tWTRL → 14

OC → Advanced DRAM Configuration → Turn Around Timing Configuration

tRDRDSCL → 6
tRDRDSC → 1
tRDRDSD → 1
tRDRDDD → 1
tWRWRSCL → 6
tWRWRSC → 1
tWRWRSD → 1
tWRWRDD → 1
tWRRD → 4
tRDWR → 16

Voltajlar

İlk denemede 1.50–1.55 V gibi agresif değerler verme. Rehber CL28/tRCD sıkılaştırmasının Hynix'te ciddi VDD ve soğutma isteyebileceğini söylüyor.

Başlangıç:

DRAM VDD → 1.40 V
DRAM VDDQ → 1.40 V
CPU SoC → Auto
VDDIO/MC → Auto
VDDG CCD → Auto
VDDG IOD → Auto
CLDO VDDP → Auto

Diğerleri

A-XMP → Disabled
Memory Try It → Disabled
Memory Context Restore → Disabled
Power Down Enable → Disabled
Gear Down Mode → Enabled
Bank Refresh Mode → Normal
FCLK → 2000
UCLK=MCLK → 1:1

MSI'nin BIOS kılavuzunda DRAM Frequency, FCLK, UCLK DIV1 MODE ve Advanced DRAM Configuration bu OC/bellek ayarları içinde bulunuyor.

Nitro

İlk CL28 denemesinde Nitro'yu ayrıca sıkıştırma. Önce yukarıdaki temel profilin boot edip etmediğini görelim.

F10 → Save Changes and Reset.

Açılırsa hemen başka ayar değiştirme. Windows'a gir → ZenTimings ekran görüntüsünü at. Oradan gerçekten 6000 / UCLK 3000 / FCLK 2000 / 28-36-36-32 uygulanmış mı kontrol ederiz.

Ayhan Dönmez · Dün 19:04

BIOS'ta gireceğin değerler

OC → DRAM Frequency

DDR5-6000

OC → FCLK Frequency

2000 MHz

OC → UCLK DIV1 MODE

UCLK=MCLK

OC → Advanced DRAM Configuration → Main Timing Configuration

tCL → 28
tRCDWR → 16
tRCDRD → 36
tRP → 36
tRAS → 48
tRC → 62
tWR → 48
tRFC1 → 420
tRFC2 → 420
tRFCsb → 390

OC → Advanced DRAM Configuration → Sub Timing Configuration

tRTP → 12
tCCDL → 12
tCCDL_WR → 48
tCCDL_WR2 → 24
tRRDS → 4
tRRDL → 8
tFAW → 20
tWTRS → 6
tWTRL → 16

OC → Advanced DRAM Configuration → Turn Around Timing Configuration

tRDRDSCL → 4
tRDRDSC → 1
tRDRDSD → 1
tRDRDDD → 1
tWRWRSCL → 4
tWRWRSC → 1
tWRWRSD → 1
tWRWRDD → 1
tWRRD → 2
tRDWR → 16

Başlangıç:

DRAM VDD → 1.40 V
DRAM VDDQ → 1.40 V
CPU SoC → AMD Overclocking 1.25
VDDIO/MC → 1.4
VDDG CCD → 1050
VDDG IOD → 1050
CLDO VDDP → 1.1
A-XMP → Disabled
Memory Try It → Disabled
Memory Context Restore → Disabled
Integrated Graphics → Disabled
Power Down Enable → Disabled
Gear Down Mode → Enabled
Bank Refresh Mode → Normal
FCLK → 2000
UCLK=MCLK → 1:1
DRAM Frequency → 6000

F10 → Save Changes and Reset.

Nitro:

Diego_Pasha · Dün 19:28

Ayhan Dönmez dedi:
BIOS'ta gireceğin değerler
OC → DRAM Frequency

DDR5-6000

OC → FCLK Frequency

2000 MHz

OC → UCLK DIV1 MODE

UCLK = MCLK

OC → Advanced DRAM Configuration → Main Timing Configuration

TCL → 28

TRCDWR → 16

tRCDRD → 36

tRP → 36

TRAS → 48

tRC → 62

tWR → 48

tRFC1 → 420

tRFC2 → 420

TRFCsb → 390

OC → Advanced DRAM Configuration → Sub Timing Configuration

tRTP → 12

tCCDL → 12

tCCDL_WR → 48

tCCDL_WR2 → 24

TRRDS → 4

TRRDL → 8

TFAW → 20

tWTRS → 6

TWTRL → 16

OC → Advanced DRAM Configuration → Turn Around Timing Configuration

TRDRDSCL → 4

TRDRDSC → 1

TRDRDSD → 1

TRDRDDD → 1

TWRWRSCL → 4

TWRWRSC → 1

TWRWRSD → 1

TWRWRDD → 1

TWRRD → 2

tRDWR → 16

Başlangıç:

DRAM VDD → 1.40 V

DRAM VDDQ → 1.40 V

CPU SoC → AMD Overclocking 1.25

VDDIO/MC → 1.4

VDDG CCD → 1050

VDDG IOD → 1050

CLDO VDDP → 1.1

A-XMP → Disabled

Memory Try It → Disabled

Memory Context Restore → Disabled

Integrated Graphics → Disabled

Power Down Enable → Disabled

Gear Down Mode → Enabled

Bank Refresh Mode → Normal

FCLK → 2000

UCLK = MCLK → 1:1

DRAM Frequency → 6000

F10 → Save Changes and Reset.

Abi sen çok büyük adamsın yeminle, çok teşekkür ederim. Bir dertten kurtardın beni. Akşam bu ayarları yapıyorum, 90 dakika test yapıyorum. Hata çıkarsa sana yazıyorum.

Ayhan Dönmez dedi:
Nitro:

Eki Görüntüle 272504

Abi Log.txt hata vardı bir daha denedim 1.txt de gene hata verdi ayarlarda artım fotoğraf şu an işe gideceğim akşam ayarlayabilirim anca.

Text dosyaları yüklenmiyor mu ya?

İlk hata bu
Starting Test | 2026-08-11 07:58:01

| Test Settings |
Threads: 8, Block Size: 3306, Total Memory: 26448 MB
Max Time: 90, Max Errors Allowed: 1, WHEA errors detection: disabled
Error Sound: enabled (beep)
Memory Reallocation Every Cycle: enabled, Large Pages: disabled
Total Physical Memory (RAM): 31653 MB
Page File is enabled
Current config file: DDR4_DDR5_universal.cfg
Config path:
Total tests found: 64
Tests loaded: inverseTest(15,4,0,0xFFBFAAFF12FFAFFF,1) IOTest(100,4,0,1,10) mirrorMoveSSE(50,32,2,1) mirrorMove(100,0,4194200,1) IO2Test(100,8,11,1) mirrorMove(2,0,0,15,2) mirrorMove(2,0,0,1) mirrorMove(35,0,1024,1) mirrorMoveSSE(25,32,4194304,1) mirrorMove(40,0,768,1) mirrorMove(4,0,0,1) mirrorMove(40,0,2048,1) rPrTest(4,0,13,1) rPrTest(6,0,27,2) inverseTest(5,0,7,0xFFB1AACF12FFAFFF,1) IOTest(1,0,19,5,60) mirrorMove(4,0,11,1) mirrorMoveSSE(100,64,128,1) prTest(2,0,43,1) mirrorMove(35,0,1568,1) inverseTestW(3,0,2,16) mirrorMoveSSE(100,64,512,1) inverseTest(5,0,768,0xFFBFAAFF12FFAFFF,1) IOTest(100,16,8,1,1) IOAVXTest(2,0,254,1,1) mirrorMove(2,0,67,20,2) inverseTestWN(3,0,4,8) mirrorMove(2,11,0,20,2) inverseTestMT(2,0,24,1) IOAVXTest(100,32,8,1,1) mirrorMove(2,0,3,64,1) IO2Test(100,16,30,1) mirrorMove(40,0,768,1) mirrorMoveSSE(5,0,1024,1) rPrTest(4,0,13,1) mirrorMove(3,0,0,1) inverseTest(5,0,1568,0xFFBFAAFF12FFAFFF,1) inverseTestW(3,0,4,2) inverseTest(10,0,1,0xFFFF00FF77FF70FF,1) rPrSSETest(3,0,1,1) mirrorMove(40,256,0,1) mirrorMove(5,0,1,1) mirrorMoveSSE(2,0,23,10,1) mirrorMove(40,0,1568,1) IO2Test(100,6,1,1) rPrSSETest(5,0,5,1) mirrorMove(2,0,54,1) inverseTestWN(3,0,8,2) inverseTestMT(3,0,111,3) mirrorMoveSSE(5,0,11,1) IOTest(100,128,2032,3,60) inverseTest(5,0,544,0xFFBFAAFF12FFAFFF,1) prTest(80,16,0,1) inverseTestW(3,0,4,6) mirrorMove(5,0,899,1) inverseTest(5,0,1,0x1FF1FFFF00FF0F1F,1) mirrorMove(10,32,99,1) IO2Test(5,0,19,1) mirrorMoveSSE(15,32,3333,1) mirrorMove(1,0,0,50,3) mirrorMove(5,0,0,1) mirrorMoveSSE(15,32,311,1) IO2Test(100,64,4,1) inverseTestMT(3,0,27,3)

Optimized block size per thread: 3292 MB

Starting memory allocation...

Total commited: 26336 MB.
Memory locked for 8 threads, not locked for 0.
[0] 3292 MB allocated.
[6] 3292 MB allocated.
[2] 3292 MB allocated.
[3] 3292 MB allocated.
[5] 3292 MB allocated.
[4] 3292 MB allocated.
[1] 3292 MB allocated.
[7] 3292 MB allocated.

[7] 07:58:06 | Test started

Current Cycle 1
[6] 07:58:09 | completed inverseTest(1,0,0), no errors, 2837.93 MB/s.
[5] 07:58:09 | completed inverseTest(1,0,0), no errors, 2829.39 MB/s.
[7] 07:58:09 | completed inverseTest(1,0,0), no errors, 2828.18 MB/s.
[4] 07:58:09 | completed inverseTest(1,0,0), no errors, 2816.08 MB/s.
[2] 07:58:09 | completed inverseTest(1,0,0), no errors, 2941.91 MB/s.
[3] 07:58:09 | completed inverseTest(1,0,0), no errors, 2769.88 MB/s.
[0] 07:58:09 | completed inverseTest(1,0,0), no errors, 2775.72 MB/s.
[1] 07:58:09 | completed inverseTest(1,0,0), no errors, 2730.82 MB/s.
[7] 07:58:17 | completed inverseTest(15,4,0,0xFFBFAAFF12FFAFFF,1), no errors, 18.73 MB/s.
[6] 07:58:17 | completed inverseTest(15,4,0,0xFFBFAAFF12FFAFFF,1), no errors, 18.67 MB/s.
[5] 07:58:17 | completed inverseTest(15,4,0,0xFFBFAAFF12FFAFFF,1), no errors, 18.50 MB/s.
[3] 07:58:17 | completed inverseTest(15,4,0,0xFFBFAAFF12FFAFFF,1), no errors, 18.87 MB/s.
[4] 07:58:17 | completed inverseTest(15,4,0,0xFFBFAAFF12FFAFFF,1), no errors, 17.95 MB/s.
[2] 07:58:17 | completed inverseTest(15,4,0,0xFFBFAAFF12FFAFFF,1), no errors, 17.88 MB/s.
[1] 07:58:17 | completed inverseTest(15,4,0,0xFFBFAAFF12FFAFFF,1), no errors, 17.57 MB/s.
[0] 07:58:18 | completed inverseTest(15,4,0,0xFFBFAAFF12FFAFFF,1), no errors, 16.03 MB/s.
[6] 07:59:01 | completed IOTest(100,4,0,1,10), no errors, 9.12 MB/s.
[7] 07:59:01 | completed IOTest(100,4,0,1,10), no errors, 9.09 MB/s.
[3] 07:59:01 | completed IOTest(100,4,0,1,10), no errors, 9.07 MB/s.
[2] 07:59:01 | completed IOTest(100,4,0,1,10), no errors, 9.05 MB/s.
[5] 07:59:01 | completed IOTest(100,4,0,1,10), no errors, 8.95 MB/s.
[1] 07:59:02 | completed IOTest(100,4,0,1,10), no errors, 8.85 MB/s.
[4] 07:59:03 | completed IOTest(100,4,0,1,10), no errors, 8.69 MB/s.
[0] 07:59:06 | completed IOTest(100,4,0,1,10), no errors, 8.26 MB/s.
[6] 07:59:23 | completed mirrorMoveSSE(50,32,2,1), no errors, 8075.79 MB/s.
[7] 07:59:23 | completed mirrorMoveSSE(50,32,2,1), no errors, 8104.55 MB/s.
[3] 07:59:23 | completed mirrorMoveSSE(50,32,2,1), no errors, 8087.63 MB/s.
[2] 07:59:24 | completed mirrorMoveSSE(50,32,2,1), no errors, 8037.64 MB/s.
[5] 07:59:24 | completed mirrorMoveSSE(50,32,2,1), no errors, 7959.62 MB/s.
[1] 07:59:25 | completed mirrorMoveSSE(50,32,2,1), no errors, 8031.96 MB/s.
[4] 07:59:26 | completed mirrorMoveSSE(50,32,2,1), no errors, 7809.71 MB/s.
[0] 07:59:32 | completed mirrorMoveSSE(50,32,2,1), no errors, 7031.73 MB/s.
[3] 08:00:07 | completed mirrorMove(100,0,4194200,1), no errors, 0.93 MB/s.
[6] 08:00:07 | completed mirrorMove(100,0,4194200,1), no errors, 0.92 MB/s.
[7] 08:00:07 | completed mirrorMove(100,0,4194200,1), no errors, 0.92 MB/s.
[2] 08:00:07 | completed mirrorMove(100,0,4194200,1), no errors, 0.92 MB/s.
[5] 08:00:08 | completed mirrorMove(100,0,4194200,1), no errors, 0.91 MB/s.
[1] 08:00:09 | completed mirrorMove(100,0,4194200,1), no errors, 0.92 MB/s.
[4] 08:00:11 | completed mirrorMove(100,0,4194200,1), no errors, 0.89 MB/s.
[0] 08:00:19 | completed mirrorMove(100,0,4194200,1), no errors, 0.86 MB/s.
[3] 08:00:50 | completed IO2Test(100,8,11,1), no errors, 246.71 MB/s.
[6] 08:00:51 | completed IO2Test(100,8,11,1), no errors, 244.80 MB/s.
[7] 08:00:51 | completed IO2Test(100,8,11,1), no errors, 244.29 MB/s.
[2] 08:00:51 | completed IO2Test(100,8,11,1), no errors, 245.06 MB/s.
[5] 08:00:53 | completed IO2Test(100,8,11,1), no errors, 240.46 MB/s.
[1] 08:00:53 | completed IO2Test(100,8,11,1), no errors, 241.34 MB/s.
[4] 08:00:59 | completed IO2Test(100,8,11,1), no errors, 226.60 MB/s.
[0] 08:01:16 | completed IO2Test(100,8,11,1), no errors, 187.70 MB/s.
[3] 08:01:24 | completed mirrorMove(2,0,0,15,2), no errors, 12544.69 MB/s.
[6] 08:01:25 | completed mirrorMove(2,0,0,15,2), no errors, 12233.30 MB/s.
[7] 08:01:25 | completed mirrorMove(2,0,0,15,2), no errors, 12223.01 MB/s.
[2] 08:01:26 | completed mirrorMove(2,0,0,15,2), no errors, 12189.07 MB/s.
[1] 08:01:29 | completed mirrorMove(2,0,0,15,2), no errors, 11726.39 MB/s.
[5] 08:01:29 | completed mirrorMove(2,0,0,15,2), no errors, 11575.95 MB/s.
[4] 08:01:37 | completed mirrorMove(2,0,0,15,2), no errors, 11042.93 MB/s.
[0] 08:02:00 | completed mirrorMove(2,0,0,15,2), no errors, 9734.47 MB/s.
[3] 08:03:20 | completed mirrorMove(2,0,0,1), no errors, 3641.47 MB/s.
[2] 08:03:22 | completed mirrorMove(2,0,0,1), no errors, 3616.74 MB/s.
[6] 08:03:23 | completed mirrorMove(2,0,0,1), no errors, 3584.87 MB/s.
[7] 08:03:23 | completed mirrorMove(2,0,0,1), no errors, 3590.00 MB/s.
[1] 08:03:27 | completed mirrorMove(2,0,0,1), no errors, 3592.20 MB/s.
[5] 08:03:29 | completed mirrorMove(2,0,0,1), no errors, 3512.49 MB/s.
[4] 08:03:37 | completed mirrorMove(2,0,0,1), no errors, 3518.89 MB/s.
[1] 08:03:58 | Error in mirrorMove(35,0,1024,1) at cycle 6, after 00:05:51 | at 4321 MB, 1 dif bit(s).
-- Total errors: 1 --

Test stopped due to maximum errors reached at 2026-08-11 08:03:58
Elapsed Time: 00:05:51
Test errors detected: 1

2. Testteki hata
_____________________________________________________
Starting Test | 2026-08-11 08:07:08

| Test Settings |
Threads: 8, Block Size: 3432, Total Memory: 27456 MB
Max Time: 90, Max Errors Allowed: 1, WHEA errors detection: disabled
Error Sound: enabled (beep)
Memory Reallocation Every Cycle: enabled, Large Pages: disabled
Total Physical Memory (RAM): 31653 MB
Page File is enabled
Current config file: DDR4_DDR5_universal.cfg
Config path: C:\Users\bayra\Downloads\ram_test_pro_1.5.0\RAMTestPro1.5.0\config\DDR4_DDR5_universal.cfg
Total tests found: 64
Tests loaded: inverseTest(15,4,0,0xFFBFAAFF12FFAFFF,1) IOTest(100,4,0,1,10) mirrorMoveSSE(50,32,2,1) mirrorMove(100,0,4194200,1) IO2Test(100,8,11,1) mirrorMove(2,0,0,15,2) mirrorMove(2,0,0,1) mirrorMove(35,0,1024,1) mirrorMoveSSE(25,32,4194304,1) mirrorMove(40,0,768,1) mirrorMove(4,0,0,1) mirrorMove(40,0,2048,1) rPrTest(4,0,13,1) rPrTest(6,0,27,2) inverseTest(5,0,7,0xFFB1AACF12FFAFFF,1) IOTest(1,0,19,5,60) mirrorMove(4,0,11,1) mirrorMoveSSE(100,64,128,1) prTest(2,0,43,1) mirrorMove(35,0,1568,1) inverseTestW(3,0,2,16) mirrorMoveSSE(100,64,512,1) inverseTest(5,0,768,0xFFBFAAFF12FFAFFF,1) IOTest(100,16,8,1,1) IOAVXTest(2,0,254,1,1) mirrorMove(2,0,67,20,2) inverseTestWN(3,0,4,8) mirrorMove(2,11,0,20,2) inverseTestMT(2,0,24,1) IOAVXTest(100,32,8,1,1) mirrorMove(2,0,3,64,1) IO2Test(100,16,30,1) mirrorMove(40,0,768,1) mirrorMoveSSE(5,0,1024,1) rPrTest(4,0,13,1) mirrorMove(3,0,0,1) inverseTest(5,0,1568,0xFFBFAAFF12FFAFFF,1) inverseTestW(3,0,4,2) inverseTest(10,0,1,0xFFFF00FF77FF70FF,1) rPrSSETest(3,0,1,1) mirrorMove(40,256,0,1) mirrorMove(5,0,1,1) mirrorMoveSSE(2,0,23,10,1) mirrorMove(40,0,1568,1) IO2Test(100,6,1,1) rPrSSETest(5,0,5,1) mirrorMove(2,0,54,1) inverseTestWN(3,0,8,2) inverseTestMT(3,0,111,3) mirrorMoveSSE(5,0,11,1) IOTest(100,128,2032,3,60) inverseTest(5,0,544,0xFFBFAAFF12FFAFFF,1) prTest(80,16,0,1) inverseTestW(3,0,4,6) mirrorMove(5,0,899,1) inverseTest(5,0,1,0x1FF1FFFF00FF0F1F,1) mirrorMove(10,32,99,1) IO2Test(5,0,19,1) mirrorMoveSSE(15,32,3333,1) mirrorMove(1,0,0,50,3) mirrorMove(5,0,0,1) mirrorMoveSSE(15,32,311,1) IO2Test(100,64,4,1) inverseTestMT(3,0,27,3)

Optimized block size per thread: 3418 MB

Starting memory allocation...

Total commited: 27344 MB.
Memory locked for 8 threads, not locked for 0.
[0] 3418 MB allocated.
[3] 3418 MB allocated.
[1] 3418 MB allocated.
[4] 3418 MB allocated.
[2] 3418 MB allocated.
[5] 3418 MB allocated.
[6] 3418 MB allocated.
[7] 3418 MB allocated.

[7] 08:07:13 | Test started

Current Cycle 1
[7] 08:07:16 | completed inverseTest(1,0,0), no errors, 2793.62 MB/s.
[6] 08:07:16 | completed inverseTest(1,0,0), no errors, 2782.25 MB/s.
[2] 08:07:16 | completed inverseTest(1,0,0), no errors, 2886.82 MB/s.
[3] 08:07:16 | completed inverseTest(1,0,0), no errors, 2772.10 MB/s.
[5] 08:07:16 | completed inverseTest(1,0,0), no errors, 2792.48 MB/s.
[1] 08:07:16 | completed inverseTest(1,0,0), no errors, 2772.10 MB/s.
[4] 08:07:16 | completed inverseTest(1,0,0), no errors, 2798.20 MB/s.
[0] 08:07:16 | completed inverseTest(1,0,0), no errors, 2760.90 MB/s.
[3] 08:07:24 | completed inverseTest(15,4,0,0xFFBFAAFF12FFAFFF,1), no errors, 17.82 MB/s.
[7] 08:07:24 | completed inverseTest(15,4,0,0xFFBFAAFF12FFAFFF,1), no errors, 17.73 MB/s.
[6] 08:07:24 | completed inverseTest(15,4,0,0xFFBFAAFF12FFAFFF,1), no errors, 17.72 MB/s.
[2] 08:07:24 | completed inverseTest(15,4,0,0xFFBFAAFF12FFAFFF,1), no errors, 17.67 MB/s.
[5] 08:07:24 | completed inverseTest(15,4,0,0xFFBFAAFF12FFAFFF,1), no errors, 17.60 MB/s.
[4] 08:07:24 | completed inverseTest(15,4,0,0xFFBFAAFF12FFAFFF,1), no errors, 17.12 MB/s.
[1] 08:07:24 | completed inverseTest(15,4,0,0xFFBFAAFF12FFAFFF,1), no errors, 16.68 MB/s.
[0] 08:07:25 | completed inverseTest(15,4,0,0xFFBFAAFF12FFAFFF,1), no errors, 16.18 MB/s.
[3] 08:08:09 | completed IOTest(100,4,0,1,10), no errors, 8.91 MB/s.
[7] 08:08:09 | completed IOTest(100,4,0,1,10), no errors, 8.91 MB/s.
[2] 08:08:10 | completed IOTest(100,4,0,1,10), no errors, 8.73 MB/s.
[5] 08:08:10 | completed IOTest(100,4,0,1,10), no errors, 8.74 MB/s.
[6] 08:08:10 | completed IOTest(100,4,0,1,10), no errors, 8.58 MB/s.
[1] 08:08:12 | completed IOTest(100,4,0,1,10), no errors, 8.35 MB/s.
[4] 08:08:13 | completed IOTest(100,4,0,1,10), no errors, 8.15 MB/s.
[0] 08:08:16 | completed IOTest(100,4,0,1,10), no errors, 7.73 MB/s.
[3] 08:08:32 | completed mirrorMoveSSE(50,32,2,1), no errors, 7760.77 MB/s.
[7] 08:08:32 | completed mirrorMoveSSE(50,32,2,1), no errors, 7716.04 MB/s.
[6] 08:08:34 | completed mirrorMoveSSE(50,32,2,1), no errors, 7720.62 MB/s.
[5] 08:08:34 | completed mirrorMoveSSE(50,32,2,1), no errors, 7420.09 MB/s.
[2] 08:08:34 | completed mirrorMoveSSE(50,32,2,1), no errors, 7352.66 MB/s.
[1] 08:08:37 | completed mirrorMoveSSE(50,32,2,1), no errors, 7432.21 MB/s.
[4] 08:08:38 | completed mirrorMoveSSE(50,32,2,1), no errors, 7235.76 MB/s.
[0] 08:08:43 | completed mirrorMoveSSE(50,32,2,1), no errors, 6728.93 MB/s.
[3] 08:09:17 | completed mirrorMove(100,0,4194200,1), no errors, 0.94 MB/s.
[7] 08:09:17 | completed mirrorMove(100,0,4194200,1), no errors, 0.93 MB/s.
[6] 08:09:19 | completed mirrorMove(100,0,4194200,1), no errors, 0.93 MB/s.
[2] 08:09:20 | completed mirrorMove(100,0,4194200,1), no errors, 0.92 MB/s.
[5] 08:09:20 | completed mirrorMove(100,0,4194200,1), no errors, 0.91 MB/s.
[1] 08:09:23 | completed mirrorMove(100,0,4194200,1), no errors, 0.91 MB/s.
[4] 08:09:25 | completed mirrorMove(100,0,4194200,1), no errors, 0.89 MB/s.
[0] 08:09:32 | completed mirrorMove(100,0,4194200,1), no errors, 0.85 MB/s.
[3] 08:10:02 | completed IO2Test(100,8,11,1), no errors, 239.03 MB/s.
[7] 08:10:02 | completed IO2Test(100,8,11,1), no errors, 237.65 MB/s.
[6] 08:10:05 | completed IO2Test(100,8,11,1), no errors, 236.35 MB/s.
[2] 08:10:06 | completed IO2Test(100,8,11,1), no errors, 234.42 MB/s.
[5] 08:10:07 | completed IO2Test(100,8,11,1), no errors, 230.31 MB/s.
[1] 08:10:10 | completed IO2Test(100,8,11,1), no errors, 226.16 MB/s.
[4] 08:10:16 | completed IO2Test(100,8,11,1), no errors, 211.60 MB/s.
[0] 08:10:33 | completed IO2Test(100,8,11,1), no errors, 177.07 MB/s.
[3] 08:10:34 | completed mirrorMove(2,0,0,15,2), no errors, 13757.55 MB/s.
[7] 08:10:35 | completed mirrorMove(2,0,0,15,2), no errors, 13417.90 MB/s.
[6] 08:10:40 | completed mirrorMove(2,0,0,15,2), no errors, 12509.05 MB/s.
[2] 08:10:41 | completed mirrorMove(2,0,0,15,2), no errors, 12370.40 MB/s.
[5] 08:10:45 | completed mirrorMove(2,0,0,15,2), no errors, 11619.67 MB/s.
[1] 08:10:48 | completed mirrorMove(2,0,0,15,2), no errors, 11492.09 MB/s.
[4] 08:10:57 | completed mirrorMove(2,0,0,15,2), no errors, 10684.64 MB/s.
[0] 08:11:20 | completed mirrorMove(2,0,0,15,2), no errors, 9468.55 MB/s.
[3] 08:12:33 | completed mirrorMove(2,0,0,1), no errors, 3656.99 MB/s.
[7] 08:12:35 | completed mirrorMove(2,0,0,1), no errors, 3632.28 MB/s.
[6] 08:12:41 | completed mirrorMove(2,0,0,1), no errors, 3615.44 MB/s.
[2] 08:12:42 | completed mirrorMove(2,0,0,1), no errors, 3621.96 MB/s.
[5] 08:12:49 | completed mirrorMove(2,0,0,1), no errors, 3514.06 MB/s.
[1] 08:12:50 | completed mirrorMove(2,0,0,1), no errors, 3600.53 MB/s.
[4] 08:13:00 | completed mirrorMove(2,0,0,1), no errors, 3560.79 MB/s.
[0] 08:13:25 | completed mirrorMove(2,0,0,1), no errors, 3500.06 MB/s.
[7] 08:15:10 | completed mirrorMove(35,0,1024,1), no errors, 383.94 MB/s.
[3] 08:15:12 | completed mirrorMove(35,0,1024,1), no errors, 374.64 MB/s.
[6] 08:15:18 | completed mirrorMove(35,0,1024,1), no errors, 377.67 MB/s.
[2] 08:15:19 | Error in mirrorMove(35,0,1024,1) at cycle 34, after 00:08:05 | at 10081 MB, 1 dif bit(s).
-- Total errors: 1 --
[2] 08:15:19 | completed mirrorMove(35,0,10
24,1), 1 error(s) found, 378.33 MB/s.

Test stopped due to maximum errors reached at 2026-08-11 08:15:20
Elapsed Time: 00:08:06
Test errors detected: 1
_____________________________________________________

Diego_Pasha · Bugün 21:12

TCL 30 yapıp bir daha deneme yapmalı mıyım sence abi yoksa önerebileceğin bir ayar var mı?
@Ayhan Dönmez

Diego_Pasha · Bugün 21:51

@Ayhan Dönmez müsaitsen bakabilir misin abi rahatsız ediyorum ama.

Ayhan Dönmez · Bugün 22:01

Diego_Pasha dedi:
@Ayhan Dönmez müsaitsen bakabilir misin abi rahatsız ediyorum ama.

Dediğin gibi ilk tCL 30 yapıp dene. Hata almazsan sorun VDD'dir... 1.4'e CL28 açılabileceği garantisi yok Hynix'te, silikona bağlı...

Ayhan Dönmez · Bugün 22:02

Diego_Pasha dedi:
@Ayhan Dönmez müsaitsen bakabilir misin abi rahatsız ediyorum ama.

Bu şekilde denemelisin...

@Diego_Pasha Bu kısım 3-3 tCK kalsın. Preamble diye aratıp 3 tCK değiştir. Dahili grafik ve MCR-PDM kapalı tut... ARd manuel 0 değerini girin...

Diego_Pasha · 40 dakika önce

Ayhan Dönmez dedi:
Bu şekilde denemelisin...

Eki Görüntüle 272752

Eki Görüntüle 272754

@Diego_Pasha bu kısım 3-3 tck kalsın. Preamble diye aratıp 3 tck değiştir. Dahili grafik ve mcr-pdm kapalı tut... Ard manuel 0 değerini girin...

Abi ben iGPU kapatmayı unutmuşum ondan kaynaklanıyor olabilir mi? yoksa hiç uğraşmayıp tcl30 mu yapayım

Ayhan Dönmez · 35 dakika önce

Diego_Pasha dedi:
Abi ben iGPU kapatmayı unutmuşum ondan kaynaklanıyor olabilir mi? yoksa hiç uğraşmayıp tcl30 mu yapayım

İkisini de... Deneyin.

Patriot Viper Xtreme 5 RAM için timing ayarı önerisi

Detaylar

Ayhan Dönmez 34

Bilgin

Diego_Pasha 2

Üyecik

BIOS'ta gireceğin değerler

Voltajlar

Diğerleri

Nitro

Ayhan Dönmez 34

Bilgin

BIOS'ta gireceğin değerler

Diego_Pasha 2

Üyecik

BIOS'ta gireceğin değerler

Diego_Pasha 2

Üyecik

Diego_Pasha 2

Üyecik

Ayhan Dönmez 34

Bilgin

Ayhan Dönmez 34

Bilgin

Diego_Pasha 2

Üyecik

Ayhan Dönmez 34

Bilgin

Benzer konular

Yeni konular

Yeni mesajlar

Patriot Viper Xtreme 5 RAM için timing ayarı önerisi

Ayhan Dönmez 34

Bilgin

Diego_Pasha 2

Üyecik

BIOS'ta gireceğin değerler​

Voltajlar​

Diğerleri​

Nitro​

Ayhan Dönmez 34

Bilgin

BIOS'ta gireceğin değerler​

Diego_Pasha 2

Üyecik

BIOS'ta gireceğin değerler​

Diego_Pasha 2

Üyecik

Diego_Pasha 2

Üyecik

Ayhan Dönmez 34

Bilgin

Ayhan Dönmez 34

Bilgin

Diego_Pasha 2

Üyecik

Ayhan Dönmez 34

Bilgin

Benzer konular

Yeni konular

Yeni mesajlar

BIOS'ta gireceğin değerler

Voltajlar

Diğerleri

Nitro

BIOS'ta gireceğin değerler

BIOS'ta gireceğin değerler